Table of Contents
Advertisement
KNOW YOUR dRILL-dRIVER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
AUXILIARY HANdLE
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
BIT STORAGE
Bits provided with the drill-driver can be placed in the
storage area, located on the base of the drill.
dIRECTION OF ROTATION SELECTOR
FORWARd/REVERSE/CENTER LOCK
Your drill has a direction of rotation (forward/reverse)
selector located above the switch trigger for changing the
direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
1/2 in. Drill with
Auxiliary Handle
Double-ended Bit (2)
Operator's Manual
FEATURES
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LEd WORKLIGHT
The LED worklight, located on the front of the tool base,
illuminates when the switch trigger is depressed. This
provides extra light for increased visibility.
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
TWO-SPEEd GEAR TRAIN
The two-speed gear train is designed for drilling or driving
at LO (1) or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1) or HI (2) speed.
VARIABLE SPEEd
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
ASSEMBLY
WARNING:
not operate this tool until the damaged or missing
parts are replaced. Failure to do so could result in
possible serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
8
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that
Advertisement
Table of Contents
