Miele PT 5136 OS Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. PT 5136 OS
  6. Operating and installation instructions
Miele PT 5136 OS Operating And Installation Instructions

Miele PT 5136 OS Operating And Installation Instructions

Vented tumble dryer
Hide thumbs Also See for PT 5136 OS:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and installation instructions
for vented tumble dryer
PT 5136 OS
en - EXP
To avoid the risk of accidents or
damage to the machine, it is
essential to read these instructions
before it is installed, commissioned
and used for the first time.
M.-Nr. 09 870 340

Advertisement

Table of Contents
loading

Related Manuals for Miele PT 5136 OS

Summary of Contents for Miele PT 5136 OS

  • Page 1 Operating and installation instructions for vented tumble dryer PT 5136 OS en - EXP To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed, commissioned and used for the first time.

  • Page 2: Caring For The Environment

    Caring for the environment Disposing of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The transport and protective packing has been selected from materials which – Make sure that your laundry is are environmentally friendly for disposal thoroughly spun before drying.

  • Page 3: Table Of Contents

    Contents Caring for the environment ......... . 2 Warning and Safety instructions .
  • Page 4 Contents Problem solving guide ..........37 Problem solving guide .
  • Page 5 Contents Settings menu ........... 60 Opening the Settings menu via the Supervisor level .

  • Page 6: Warning And Safety Instructions

    If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
  • Page 7 Do not install or use a damaged tumble dryer. Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Do not connect the tumble dryer to the mains electricity supply by an extension lead. Extension leads are a fire hazard and do not...
  • Page 8 Warning and Safety instructions The tumble dryer may only be operated when the following conditions are met: – the ship’s hull is longer than 28 metres. – the list of the vessel is not more than 2°. – any external vibration is no more than 150 Hz at an amplitude of 0.35 mm.
  • Page 9 Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the guarantee. Ensure current is not supplied to the tumble dryer until after maintenance or repair work has been carried out.
  • Page 10 Warning and Safety instructions Please observe the instructions in "Installation and connection" and "Technical data". The socket must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply. For hard-wired machines, the all-pole isolator provided on-site must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply.
  • Page 11 Warning and Safety instructions Correct use The maximum load of dry laundry for this tumble dryer is 6.5 kg. See the Programme chart for the maximum recommended loads in individual programmes. Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.
  • Page 12 Warning and Safety instructions The tumble dryer must only be used when it is connected to a suitable ducting system. The installation site must be adequately ventilated. The ducting must not be connected to – a chimney or vent flue which is in use, –...
  • Page 13 Warning and Safety instructions If more than one tumble dryer is being installed using a joint ducting system, each dryer must have its own non-return flap to the joint ducting system. Otherwise the dryers could be damaged, endangering their electrical safety. The fluff filter must be cleaned regularly.
  • Page 14 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
  • Page 15 Warning and Safety instructions Danger. This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device). If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust. To prevent the risk of fire, the following must not be tumble dried: –...
  • Page 16 Warning and Safety instructions Benzine, petrol, paraffin or any easily flammable liquid must not be stored or used near the tumble dryer. Danger of fire and explosion. Do not allow air contaminated with chlorine, fluorine or other vapours containing solvents to get into the tumble dryer. Fire hazard.
  • Page 17 If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele tumble dryer and Miele washing machine.

  • Page 18: Operating The Tumble Dryer

    Opens the machine door display independently of the electricity supply. e PC/Optical interface This is used by Miele service Before using for the first time technicians during servicing work for testing purposes. Before using the machine for the first time, ensure that it is correctly installed and connected.

  • Page 19: Display

    Operating the tumble dryer Display The following are shown in the display: – Programme selection – Programme duration and the programme start and end time The following are selected via the display – Special programmes Denim Shirts Outerwear –/+ buttons Proofing Automatic (if activated) For altering the values shown in the...

  • Page 20: Before Using For The First Time

    Settings menu. the Entry menu appears. : 00 When the tumble dryer is switched on for the first time, the Miele Professional welcome screen will appear. Set the time of day ^ Set the hour with the - and + buttons,...

  • Page 21: Notes And Tips On Laundry Care

    Notes and tips on laundry care 1. Sort the laundry – New dark-coloured garments should be washed and dried separately Garment care label symbols from light-coloured garments the first few times they are washed, to avoid Drying the risk of colours running and Normal/higher temperature discolouring other garments or even the plastic components in the tumble...

  • Page 22: Load The Tumble Dryer

    Notes and tips on laundry care 2. Load the tumble dryer 3. Select a programme – On many programmes, different Using the tumble dryer drying levels can be selected incorrectly could cause a fire. Read depending on individual the "Warning and Safety instructions" requirements before using the machine.

  • Page 23: Short Instructions

    Short instructions A Sort the laundry It is very important to read the "Notes and tips on laundry care" section before proceeding. B Load the tumble dryer To avoid damaging your laundry, when shutting the door check that no items of laundry have become trapped in the door opening.
  • Page 24 Short instructions C Select a programme To select a Special programme ^ Press the On/Off button s briefly to A selection of programmes will appear switch on. in the display when you select Special programmes. Please note: Denim – If no further selection is made within 15 minutes, the dryer will switch off Shirts automatically.
  • Page 25 Short instructions Low temperature button Changing the programme sequence ^ For drying particularly sensitive Further information about the following fabrics (care symbol r), e.g. can be found under "Changing the acrylics, press the Low temperature programme sequence": button. – Coin box Because the heater rating is reduced –...
  • Page 26 Short instructions Before the end of a programme There is a cooling down phase at the end of the drying sequence: Cooling down will appear in the display. The programme will not finish until the cooling down phase has been completed.

  • Page 27: Delay Start

    Delay start To begin delay start Depending on the Delay start setting, ^ Press the Start button. you can set the time you wish a programme to finish or start at, or you Normal can delay the start of the programme. Factory default: Delay start not activated.

  • Page 28: Programme Chart

    Programme chart Basic programmes Cottons t ** Max. load 6.5 kg* Use for Normal wet cotton laundry, as described in Cottons Normal . Notes – Items are dried to a "Normal" level only. – Cottons t is the most energy-efficient programme for drying normal wet cotton laundry.
  • Page 29 Programme chart Towelling max. 6.5 kg Normal+ Use for – Large quantities of single-layer and multi-layer towelling items. – Towels, dressing gowns, face flannels, towelling bedding. Woollens handcare max. 2.5 kg Use for Woollen garments. Note – Items are dried and aired briefly. –...

  • Page 30: Special Programmes

    Programme chart Special programmes Denim max. 3.5 kg Normal, Hand iron r Use for – Denim garments, e.g. jeans, jackets, skirts, shirts. Shirts max. 2.5 kg Normal, Hand iron r Use for – Shirts and blouses. Outerwear max. 3.5 kg Normal, Hand iron r Use for –...
  • Page 31 Programme chart The following programme must be activated by a Service technician: Automatic Max. load 3.5 kg* Normal+, Normal, Hand iron r Use for – Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Smoothing max.
  • Page 32 Programme chart Standard pillows max. 2.5 kg Normal Use for – Feather or down pillows. – Quantity: 2 pillows 80x80 cm Delicates max. 4 kg Normal+, Normal, Hand iron r Use for – Delicate cotton, synthetic and mixed fibre fabrics –...
  • Page 33 Programme chart Basket programmes (20-90 min) Note – The drying basket (optional accessory) must be in place when items are dried or aired using this programme. – To prevent the risk of damage when the drum rotates, do not place large items which could come into contact with the drum or drum ribs in the drying basket (e.g.

  • Page 34: Changing The Programme Sequence

    Take care when in the vicinity of the machine, * A Miele service technician can re-set when opening the door and the payment system so that handling freshly dried laundry.

  • Page 35: Cleaning And Care

    Clean the filter after each your Miele dealer or the Miele Spare drying cycle*. Parts Department, or use a vacuum cleaner.

  • Page 36: Cleaning The Grilles In The Drum Aperture

    Cleaning and care Cleaning the grilles in the Cleaning the tumble dryer drum aperture Disconnect the machine from the Clean the grilles in the drum aperture mains electricity supply. and also the airways underneath them from time to time. Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners.

  • Page 37: Problem Solving Guide

    Problem solving guide Problem solving guide With the help of the following notes minor faults in the performance of this dryer, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with current local and national safety regulations.
  • Page 38 Problem solving guide Problem Possible cause Remedy Power failure If the dryer is switched off – After switching the dryer Programme during a drying programme on / power has been stopped or there has been a power restored, confirm with OK cut: and start the programme again.

  • Page 39: An Unsatisfactory Drying Result

    Problem solving guide An unsatisfactory drying result Problem Possible cause Remedy The laundry is not The load consisted of – Finish drying using the sufficiently dry. different fabrics. Warm air programme. – Select a different programme next time (see "Programme chart").

  • Page 40: Other Problems

    Problem solving guide Other problems Problem Possible cause Remedy The drying You might be asked to Please check all possible process goes on clean the ducting causes, described below. too long or even system/filters again. switches off. The fluff filter is blocked. –...
  • Page 41 Problem solving guide Problem Possible cause Remedy There is a build-up There is more than one – The dryer must only be of condensed water tumble dryer vented connected to a joint ducting in the drum. together. system if a non-return flap is in place.
  • Page 42 The programme selector The programme selector light goes out when the light comes on when a Settings menu has been programme is selected. selected. If the problem persists, Contact the Miele Service there is a fault. Department.

  • Page 43: Changing The Lamp

    ^ Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover. The cover will open downwards. The temperature resistant lamp should only be ordered from your Miele dealer or the Miele Spare Parts Department.

  • Page 44: After Sales Service

    – the Miele Service Department (see back cover for contact details). Optional accessories for this dryer are available from your Miele Dealer or from When contacting the your Dealer or the the Miele Spare Parts Department. Service Department, please quote the...

  • Page 45: Installation And Connection

    Installation and connection Front view a Vent ducting g Fixing bracket (for installing on a concrete plinth) b Mains connection cable c Control panel d Door e Four height adjustable screw feet f Plinth...

  • Page 46: Side View

    Miele washing machine in a washer-dryer stack. A stacking kit is b Steel plinth base (optional required which can be purchased from accessory, available open or closed) Miele. The stacking kit must be fitted by a Miele authorised service technician.

  • Page 47: Installing The Tumble Dryer

    Installation and connection Installing the tumble dryer Levelling the machine Make sure the dryer door can be opened without hindrance after installation. Transporting the dryer to its installation site The machine must be perfectly level to ensure safe and proper operation. When moving the dryer hold it by the lid where it protrudes to the rear.

  • Page 48: Securing The Tumble Dryer Against Slippage

    (optional accessory). the machine and the floor. It must This must be connected and not be blocked by deep pile programmed by a Miele Service carpets, plinths, etc, which would technician. prevent a sufficient intake of cold air. Coins/tokens must be removed from...

  • Page 49: Electrical Connection

    THIS MACHINE MUST BE a 30 mA residual current device (RCD). EARTHED An electrical safety test must be carried out after installation and after any ser- vice work. The mains connection cable may only be replaced by an original Miele spare part.

  • Page 50: Single Phase Ac 230 V - Country Variant

    Installation and connection Single phase AC 230 V - country variant This device is intended for connection to a power supply system where the maximum value of external phase neutral loop impedance Z 0.39 Ohms at the point of distributor supply connection is not exceeded.

  • Page 51: Installation - Extraction Ducting

    Installation - extraction ducting General Avoid: – very long ducting systems. Before operating the tumble dryer, a suitable ducting system – too many tight bends or corners. must be installed to carry the moist Otherwise the drying result will be less air from the dryer to the outside.

  • Page 52: To Calculate The Total Duct Length

    Installation - extraction ducting To calculate the total duct 4. Refer to Table II for the appropriate duct diameter required. length Table I Friction against the inner walls of the vent ducting will slow down the Component Additional duct expelled air as it passes through the length ducting.

  • Page 53: Calculation Example

    Installation - extraction ducting Installation to the rear, left or Calculation example right hand side of the machine To the rear The connection is opened at the factory. ^ Fit one of the venting systems described on the following pages. To the left or right side of the machine.

  • Page 54: Venting System With Plastic Piping

    100 mm, an adapter is necessary (e.g. 100 to 125 mm) to connect the pipe to the dryer. 1. Wall vent kit (separate fitting instructions are supplied with the Miele wall vent kit) 2. Adpater 3. Plastic piping, diameter DN 100...

  • Page 55: Venting System With Flexible Ducting

    (* optional accessories) 1. Window vent kit (fitted in a "plexiglass" pane) (separate fitting instructions are supplied with the Miele window vent kit) 2. Adapter for flexible ducting hose ^ The ducting (2) is connected to adapter (1) which is fitted into the...
  • Page 56 Installation - extraction ducting Connection to an exhaust flue 1. Pipe with connection piece (= supplied with wall vent kit) 2. Adapter for flexible ducting hose 3. Exhaust flue insulated against damp The exhaust air must not be vented into a chimney or vent flue which is in use, nor should it be connnected to ducting which ventilates rooms with fireplaces.

  • Page 57: Main Venting Duct

    1 Connection to the main venting duct Dryers for the pipe diameter 2 Miele non-return flap* from Table II 3 Additional Miele adapter* 4 Miele vent hose, very flexible* 1.25 ^ Push the non-return flap (2) completely into the adapter (3).

  • Page 58: Technical Data

    Technical data Height 850 mm Width 595 mm Depth 710 mm Depth with door open 1,188 mm Weight 58 kg Drum volume 130 litres Maximum capacity 6.5 kg dry weight Length of connection cable 1,600 mm Voltage Connected load Fuse rating See data plate Lamp wattage Test certificates awarded...

  • Page 59: Changing Default Settings

    – Code not required Some of the settings may be changed. – Code required All of the settings may be changed. Please contact Miele for details. Note: The tumble dryer must be commissioned as described at the beginning of this booklet.

  • Page 60: Settings Menu

    Settings menu Opening the Settings menu Closing the Settings menu Back A If the Settings menu is not locked, some of the settings may be Language F changed. Supervisor level A The entry menu showing the current ^ Select Back and confirm your time of day will appear after the dryer selection with the OK button.

  • Page 61: Language J

    Settings menu Language J You can select the language displayed via the Languages J sub-menu. Enter code The flag after the word Language acts ^ Use the + button to enter the first as a guide to prevent a language which number.

  • Page 62: Anti-Crease

    Settings menu Anti-crease Time of day At the end of the programme the First select whether you want the drum can be set to rotate at intervals clock displayed as a 24 hour or 12 for one or two hours to prevent hour clock, or to not display it at all.

  • Page 63: Standby

    Settings menu Standby You cannot extend the cooling down time for the Warm air, Cool air, To save energy, the display goes out Woollens handcare or Smoothing after 10 minutes and the indicator programmes. light for the Start button flashes slowly.

  • Page 64: Clean Out Airways

    Settings menu Clean out airways Delay start The electronic unit in the dryer You can set a later start time using detects the degree of a blockage Delay start (see "Delay start"). caused by fluff or detergent residues You can decide how this time is in the fluff filter or ducting, and the displayed.
  • Page 68 Australia, Asia, Oceania: +61 3 9764 7880 Europe, Africa, Middle East: +49 5241 89 66 877 E-mail: service@miele-marine.com www.miele.com/marine-service Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany Alteration rights reserved/3715 M.-Nr. 09 870 340 / 04 M.-Nr. 09 870...

Table of Contents