Setting Up The Speakers - Yamaha NS-AP8600 Owner's Manual

Stand mounting for the satellite speakers
You need a Phillips screwdriver for assembly of the
speaker stand.
Be sure to use the correct screw type.
1
Remove the adapter from the stand.
Speaker stand
2
Put the non-skid pads to the base as shown
below.
Non-skid pad
NS-AP8600/SPS-8600

SETTING UP THE SPEAKERS

Adapter
Screw
Speaker stand
3
Pass the speaker cable through the speaker
stand from the under side of the speaker
stand.
Speaker cable
4
Pass the speaker cable through the hole in
the adapter.
Speaker cable
Speaker stand
Adapter
Speaker stand
5