Using This Unit; About The Status Indicator (Led) - Yamaha NX-B02 Owner's Manual

1
Press to turn this unit on.
The status indicator (LED) lights up.
2
Start playback of your Bluetooth
component or portable audio player.
3
Adjust the volume level using / .
Note
During playback, the Bluetooth connection takes priority
over the analog connection.

About the status indicator (LED)

LED status
Lit in green
Lit in blue
Flashing
Flashes once
Off
1
Make sure that this unit is turned off.
2
While pressing and holding ,
The status indicator (LED) flashes in blue.
3
Press .
This unit clears the pairing data.
When clearing is finished, the status indicator (LED) lights up in green.
4
En

Using this unit

The current status of this unit
This unit is on and playbacks your portable audio player.
This unit is on and playbacks your Bluetooth component.
This unit is muted or in pairing mode.
The volume of this unit is the maximum or minimum.
This unit is off, or power supply is not connected.
Clearing the pairing data
and , press
y
• This unit is a stereo speaker. To
enjoy the fine sound balance
between right and left, face the
Yamaha logo to the listening
position.
• When not using this unit, press
save the power.
After using this unit
1
Stop playback of your Bluetooth
component or portable audio player.
2
Press to turn this unit off.
The status indicator (LED) turns off.
to turn this unit on.
to turn this unit off to