Honda 2017 Civic Owner's Manual page 177

uuOperating the Switches Around the Steering WheeluAuto High-Beam
■
To manually cancel the system temporarily
You can cancel the operation when you manually change the headlights to high
beams. Push the lever forward until you hear a click, or lightly pull the lever towards
you to flash high beams. The auto high-beam indicator goes off.
If you want the auto high-beam operation to resume at once, pull the lever towards
you.
■
To Disable the System
AUTO Position
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
176
Disable the system when the vehicle is parked
with the ignition switch in ON
light switch is in the AUTO position.
To disable the system: Pull the light switch
lever towards you and hold it for 40 seconds.
The auto high-beam indicator in the meter will
blink twice.
To enable the system: Pull the light switch
lever towards you and hold it for 30 seconds.
The auto high-beam indicator in the meter will
blink once.
*
1To Disable the System
The auto high-beam is in the previously selected
disabled or enabled setting each time you start the
*1 and the
( w
engine.