Other Functions; Introduction Of Setup Adjustments; Setting The Video Input; Setting For Back Up Camera - Pioneer AVH-P7550DVD Operation Manual

Section
17

Other Functions

Introduction of setup
adjustments
1 Setup menu display
Shows the setup function names.
% Touch A.MENU and then touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
# When A.MENU is not displayed, you can dis
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically re
turned to the source display.

Setting the video input

You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a con
nected component as AV source.
! Select M-DVD to watch video of a con
nected DVD player as S-DVD source.
84
En
1
1 Touch A.MENU and SETUP and then
touch AV INPUT.
2 Touch any of the following touch panel
keys to select the video input setting.
! OFF  No video component is connected
! VIDEO  External video component
! M-DVD  DVD player connected with RCA
cable
# When a DVD player is connected with an AV
BUS cable, do not select M-DVD or else no pic
ture is displayed even if you select S-DVD.
Setting for back-up camera
This unit features a function that automatically
switches to the back up camera video (BACK
UP CAMERA IN jack) when a back up camera
is installed on your car. When the gear shift is
in REVERSE (R) position, the video automati
cally switches to a back up camera video. (For
more details, consult with your dealer.)
! We recommend that you use a camera
which outputs mirror reversed images.
! Confirm the setting immediately whether
the display changes to a back up camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
! When the display changes to a back up
camera video during normal drivings,
switch to another setting.
! To return to the source display, press
MENU on the head unit.
1 Touch A.MENU and SETUP and then
touch BACK UP CAMERA.
2 Touch a to turn back-up camera setting
on.
# To turn back up camera setting off, touch b.