Panasonic PT-50LCZ70 Operating Instruction page 27

6. Press ▲▼ to select "ANT in".
7. Press ◄► to select "Antenna" or "Cable".
8. Press ▲▼ to select "Auto".
9. Press OK to display the Auto program menu.
10. Press ▲▼ to select "All channels", "Analog
only", or "Digital only".
11. Press OK to start scan.
12. After Auto program is complete, the unit will
return to Manual program mode. To place
the channels that were located by auto scan
in memory, move the cursor to "Apply" and
press OK. (p. 27-28)
If OK is not pressed after selecting APPLY,
the channels will not be memorized.
Notes
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the "Manual program setting". (p. 27-28)
• "Auto program" must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
Program channel Program channel
ANT in ANT in
Cable Cable
Auto Auto
Manual Manual
Signal meter Signal meter
Program channel Program channel
ANT in ANT in
Cable Cable
Auto Auto
Manual Manual
Signal meter Signal meter
Auto program Auto program
All channels All channels
Analog only Analog only
Digital only Digital only
Auto program Auto program
Scanning digital channel Scanning digital channel
Progress Progress
Quit Quit 40% 40%
Manual program setting
Use this procedure when changing setting of
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list
manually.
Procedure
1. Press MENU to display the Main Menu
screen.
2. Press ▲▼ to select "Setup" icon.
3. Press OK to display the Setup menu.
4. Press ▲▼ to select "Program channel".
5. Press OK to display the Program channel
menu.
• If Lock (p. 41) has been set, you must enter your
password to display the Program channel menu.
6. Press ▲▼ to select "Manual".
7. Press OK to enter the Manual program
screen.
Menu Menu
EZ Sync EZ Sync
Picture Picture
Audio Audio
Timer Timer
Lock Lock
Memory card Memory card
Setup Setup
Setup Setup
1/2 1/2
Surf mode Surf mode
All All
Language Language
Program channel Program channel
External devices External devices
CC CC
EZ Sync setting EZ Sync setting
Program channel Program channel
ANT in ANT in Cable Cable
Auto Auto
Manual Manual
Signal meter Signal meter
27