Honda 1994 Accord Sedan Owner's Manual page 168

Lights
Replacing a Front Turn Signal
Light Bulb
1. Use a Phillips-head screwdriver to
loosen the turn signal assembly's
mounting screw.
2. Remove the turn signal assembly
from the bumper.
Maintenance
TURN SIGNAL ASSEMBLY
BULB
BULB HOLDER
3. Remove the bulb holder from the
turn signal assembly by turning it
counterclockwise.
4. Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwise until it
unlocks.
Install the new bulb.
5. Push the bulb holder into the turn
signal assembly and turn it
clockwise until it locks.
6. Test the turn signals to make sure
the new bulb is working.
7. Put the turn signal assembly into
the bumper. Make sure the tabs
on the turn signal assembly fit into
the bumper slots. Tighten the
mounting screw.