The Sleep Timer; The Timer Fader - Panasonic RX-EX1 Operating Instructions Manual

20
RQT5671
Y
PLAY RE FADER SLEEP EQ ON
1 ALL - 1 REC
REC ST
PGM RANDOM MONO
Y
PLAY RE SLEEP
FADER EQ ON
1 ALL - 1 REC
REC ST
PGM RANDOM MONO
Using the Timer
To check the settings (when unit is off)
Press [CLOCK/TIMER].
The settings are shown in the following order:
Start time, Finish time Source
To change the settings (when unit is on)
To change the times
Do steps , , , and .
To change the source or volume
1. Press [ PLAY/REC] to clear the timer indicator.
2. Make changes to the source or volume.
3. Do steps to .
You can enjoy other sources after you have set
the timer.
Turn the unit off before the timer's start time.
The play and record timers cannot be used together.

The Sleep Timer

Remote control only
Set the unit to stop and turn off after a certain time.
While listening to a CD, a cassette, or the radio.
Press [SLEEP] to select the time (in minutes).
Each time the button is pressed
SLEEP 30 SLEEP 60
SLEEP OFF SLEEP 120
To cancel
Press [SLEEP] to select "SLEEP OFF".
To check the remaining time
Press [SLEEP] once.
The remaining time is shown for about 5 seconds.
To change the time.
Press [SLEEP] to select the new time.
The sleep timer can be used in combination with the play
and record timers. Make sure the unit is off before the play
or record timer's set start time.

The Timer Fader

Remote control only
Volume increases slowly to the set level when a timer turns
the unit on and decreases slowly when the sleep timer
turns the unit off.
Press [TIMER FADER] to display
(All timers will be affected.)
Press again to cancel.
This feature does not affect record timer's recordings.
Volume Clock
SLEEP 90
.
" "