Table of Contents
Advertisement
3.
Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
When you finish, move the
4.
selector switch to the center (off)
position. This turns off the
adjustment switch so you can't
move a mirror out of position by
accidentally bumping the switch.
Parking Brake
To apply the parking brake, pull the
lever up fully. To release it, pull up
slightly, push the button, and lower
the lever. The parking brake light on
the instrument panel should go out
when the parking brake is fully
released (see page
44
). If you try to
drive the vehicle without releasing
the parking brake, the ABS indicator
may come on, and the ABS may not
work properly.
Mirrors, Parking Brake
Driving the car with the parking brake
applied can damage the rear brakes
and axles.
Instruments and Controls
79
Advertisement
Table of Contents
