Taking Photos - Vivitar 5399 Owner's Manual

If the camera is not in use or in an operational mode for 60 seconds it will switch off
automatically.
When there is insufficient battery power, a "Low Battery" message will appear on the LCD
screen. The camera will automatically power off a few moments later

Taking Photos

After you power on your camcorder, the default mode is camera capture.
The camera
Important: The camera`s internal memory is limited.
Insert a compatible SD card of up to 8GB to expand the memory and take
many more images.
1. Use the image that appears in the LCD to compose your shot.
2. Hold the camera steady and press the Shutter button on the top of the camera.
3. The camera will beep and the picture taken is now saved to the memory.
4. The number of photos that can be taken for each resolution and per the memory
card inserted appears on the top left of the LCD screen.
5. After the shot is taken the number on the left tells you the number of the photo
icon will now appear on the top left corner of the LCD screen.
11
.