File Menu - Sony PDW-850 Operation Manual

No. Page Item
28 META OUT META DATA ITEM
OUT
29 HEADSET INCOM MIC SEL
SELECT
(CA-FB70,
CA-TX70
INCOM MIC
Camera
LEVEL
Adaptors only)
INCOM MIC GAIN –6dB/0dB/+6dB Sets the gain of the INTERCOM microphone.
INCOM MIC POW OFF/ON
INCOM MIC
UNBAL
INCOM SIDE
TONE
a) The setting of this item is overridden by the setting of
Other BEFORE END when TYPE DETECTION in
the BATTERY 2 page is set to "OTHER".
b) The setting of this item is overridden by the setting of
Other END when TYPE DETECTION in the
BATTERY 2 page is set to "OTHER".
c) When TYPE DETECTION in the BATTERY 2 page
is set to "AUTO", any batteries other than Sony BP-
series batteries and Anton Bauer intelligent battery
systems are classified as "Others".
d) Flashes once per second when the battery status is
"BEFORE END", and flashes 4 times per second
when the battery status is "END".

FILE menu

No. Page Item
01 USER FILE USER FILE LOAD
USER FILE SAVE
F.ID
USER PRESET
Settings Description
OFF/ON Sets whether to put recorded VANC packet
information in DATA ITEM in MXF files
when transferring files via FTP.
OFF: Do not include VANC packet
information.
ON: Include VANC packet information.
DYNMIC/ Sets the type of the INTERCOM microphone.
CARBON/
MANUAL
–60dB/–40dB/ Sets the level of the INTERCOM microphone
–20dB (–60dB is selected when MIC SEL is set to
DYNMIC or CARBON)
Turns the power supply for the INTERCOM
microphone on/off (OFF is selected when
MIC SEL is set to DYNMIC or CARBON).
OFF/ON Turns unbalanced input for the INTERCOM
microphone on/off (ON is selected when MIC
SEL is set to CARBON).
50 to 99 Sets the level of the INTERCOM sidetone.
e) A setting for this item is required when AU CH34
AGC MODE in the AUDIO-2 page is set to OFF.
f) A setting for this item is required when the DWR-
S02D Digital Wireless Receiver is installed.
g) SDI OUT 1 SELECT or SDI OUT 2 SELECT in the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
h) Pixel noise is reduced to some extent by automatic
black balance adjustment (see page 55), but the
detection capabilities of that function are limited. For
the most effective correction, execute the APR
function.
If "No More White Pixel" appears after the APR
function is executed, then there are no more detectable
white flecks.
Settings
EXEC
EXEC
Blank/up to 16
characters
EXEC
Description
For details, see "Saving and
Recalling User Files" (page 220).
For details, see "Resetting USER
menu settings to the standard
settings" (page 200).
Menu List 187