Advertisement
2.
S
PECIAL MAINTENANCE
Special maintenance must be carried out by trained personnel
This includes:
- working on worn, defective or broken parts;
- replacement of the vertical blades (fig. 1 point O), since they are located in a position
that requires complete disassembly of the cutting unit and subsequent adjustments for
repositioning;
-
sharpening the blades (the blades wear down naturally as they work: tough material
will cause them to wear more rapidly than soft material; when the blades have lost their
edge and the material is no longer shredded as finely as before, they must be
sharpened);
-
work on the engine (all intervention on the engine must be carried out by a specialized
workshop authorized by the engine manufacturer).
3. T
ECHNICAL SERVICE
Special maintenance must be carried out in compliance with the instructions contained in
this manual and in the engine manual. For all cases not included, we urge you to contact
the manufacturer directly, referring to the data listed on the identification plate attached to
the machine.
Providing correct references ensures a rapid, accurate response.
For prompt delivery of spare parts, the following information must always be included in
the order:
- Machine model and serial number
- Description of the component and quantity desired
4.W
ARRANTY
The shredder is guaranteed for 12 months from the purchase date, not including the en-
gine to which the warranty provided by the engine manufacturer applies. The manufac-
turer will replace any parts found to be defective at no charge. Labor and shipping costs
shall be at the purchaser's expense.
The manufacturer must be notified immediately of any damage attributed to shipping.
Concerning materials not manufactured by us, particularly the engine, you must follow the
rules set forth by the respective manufacturers. Therefore, any repair requests must be
forwarded to the specific service center in the appropriate area.
If machine maintenance has not been carried out according to the instructions provided,
using non-original spare parts or without written authorization by the manufacturer, or in
any case in such a way as to interfere with the integrity of the machine or alter its charac-
teristics, the manufacturer shall be relieved of any liability regarding personal safety and
defective operation of the machine.
Any unauthorized alterations shall void the contractual warranty.
4
Advertisement
