ABB TPU2000 Technical Manual page 314

Modbus/modbus plus/ modbus tcp/ip automation
Table of Contents

Advertisement

TPU2000/2000R Modbus/Modbus Plus/ Modbus TCP/IP Automation Guide
6 Load Profile Commands & Records ( 3 6 n )
N
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
6.0
Load Profile Settings ( 3 6 0 )
Reserved for user configuration.
6.1
Accumulate Load Profile Data ( 3 6 1 )
6.2
Freeze Load Profile Data ( 3 6 2 )
6.3
Report Load Profile Data Header(All Data) ( 3 6 3 )
This command is used to initialize the unit to report the entire contents of the accumulated load profile.
Msg byte
1/1
1/2-4/1
4/2
4/3-9/3
10/1-11/2
11/3
12/1-12/2
12/3-17/3
Attr#
0
1
2
3
6.4
Report Next Load Profile Data Block ( 3 6 4 )
Msg byte
1/1
1/2-1/3
2/1
2/2-3/3
4/1-45/3
Definition
Define Load Profile Settings
Start Load Profile Data Accumulation
Freeze Load Profile Data
Report Load Profile Header-All
Report Next Load Profile Data Block
Retransmit Last Load Profile Data Block
Report Load Profile Header-Last
Not in use
Fault Record-First
Fault Record-Next
Restraint Record-First
Restraint Record-Next
Oldest Unreported Differential Record
Oldest Unreported Through Fault Record
Oldest Unreported Harmonic Restraint Record
Oldest Unreported Operations Record
Definition
Relay Status (see command 3 4 1, msg 1/1)
Report Column (1-9) Attribute Number
spare
Unit Id Name (16 chars)
Time Tag of the first Block reporting (5 bytes :yy,mn,dd,hh,mm in order)
spare
Report Column 1 Attribute Scale(high, low byte)
Report Column (2-9) Attribute Scale
Description
Dynamic Scale
Demand Ia
Demand Ib
Demand Ic
Demand In
Definition
Demand Interval (5/15/30/60 Mins)
Record # (a number starting from 1 to #of blocks)
Total Number Data Bytes (1 through 126)
Time Tag of the first Block (5 bytes : hh, mm, dd, mn, yy in order)
NOTE: Different order from command 3 6 3 time stamp.
Data Blocks (up to 126 bytes of data)
1
1
1
1
304

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tpu2000r

Table of Contents