Overview Of Fabric Manager; Overview Of Vsans, Interfaces, Zones, And Zone Sets - Cisco MDS 9000 Configuration Manual

Overview of Fabric Manager

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Start the process by setting up the hardware and performing the initial switch setup using the CLI. Then
install Cisco Fabric Manager, and use it to configure VSANs, interfaces, zones, and zone sets, which are
the minimum requirements for creating a fabric.
After setting up the switch, if you choose to perform further configuration tasks using the CLI, refer to
Note
the Cisco MDS 9000 Family Configuration Guide.
This chapter includes the following sections:
•
•
Overview of Fabric Manager
Fabric Manager provides a graphical user interface (GUI) that displays real-time views of your network
fabrics and lets you manage the configuration of Cisco MDS 9000 Family devices and third-party
switches. It provides an alternative to the CLI for most switch configuration commands.
Fabric Manager includes management applications, such as Fabric Manager Client, Fabric Manager
Server, Device Manager, Performance Manager, and Fabric Manager Web Services. For further details
regarding the various management components of Fabric Manager, refer to the Cisco MDS 9000 Family
Fabric Manager Configuration Guide.
Fabric Manager Server must be started before running Fabric Manager. On a Windows PC, Fabric
Manager Server is installed as a service. This service can then be administered using the Windows
Services applet in the control panel. Fabric Manager Server discovers the physical and logical fabric,
and listens for SNMP traps, syslog messages, and Performance Manager threshold events.
See
Manager.

Overview of VSANs, Interfaces, Zones, and Zone Sets

VSANs, interfaces, zones, and zone sets comprise the minimum configuration required for a Cisco MDS
9000 Family switch to be up and running.
Virtual SANs can scale SANs beyond current limitations in a resilient, secure, cost-effective, and
manageable fashion. Using VSANs, you can build larger consolidated fabrics and still maintain the
required security and isolation between applications beyond what is currently offered through zoning. A
VSAN can create separate virtual fabrics on top of the same redundant physical infrastructure.
Interfaces enable a switch to relay frames from one data link to another. You must define the
characteristics of the interfaces through which the frames are sent and received. The configured
interfaces can be Fibre Channel interfaces, the management interface (mgmt0), or VSAN interfaces.
The zoning service within a Fibre Channel fabric can provide security between devices sharing the same
fabric. The primary goal is to prevent certain devices from accessing other devices within the fabric.
With many different types of servers and storage devices on the network, the need for security is critical.
For example, if a host was to gain access to a disk being used by another host, potentially with a different
operating system, the data on this disk could get corrupted. To avoid any compromise of critical data
within the SAN, zoning allows you to overlay a security map dictating which devices, namely hosts, can
communicate with which targets, reducing the risk of data loss.
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
1-2
Overview of Fabric Manager, page 1-2
Overview of VSANs, Interfaces, Zones, and Zone Sets, page 1-2
Chapter 3, "Installing and Launching Fabric Manager,"
Appendix A, "Fabric Manager Client,"
for instructions on installing Fabric
has further details on using the Fabric Manager Client.
Chapter 1 Overview
OL-7765-02