Print Orders - Canon DC410 Instruction Manual

T
O CANCEL THE PRINTING
1 Press while printing.
2 Select (
W
HEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder
and printer and turn off the camcorder.
P
RINT ERRORS
If an error occurs while printing, an error
message (for example, [NO PAPER]) will
appear on the camcorder's screen. Solve
the problem referring to the error message
list ( 77) and to the printer's instruction
manual.
• Canon's PictBridge-compatible printers: If
printing does not resume automatically
after you solved the problem, select
[CONTINUE] and press
printing. If that option is not available,
select [STOP] and press
restart printing from the beginning.
• Other printers or if the error still persists with
a Canon printer: If printing does not
resume automatically, disconnect the
USB cable and turn off the camcorder.
After a short while, turn on the
camcorder and restore the USB
connection.
IMPORTANT
• You may not be able to print correctly
with a PictBridge-compatible printer still
images whose file names have been
changed or that were recorded, created,
edited or changed with any device other
than this camcorder.
• Observe the following precautions while
printing:
- Do not turn off the camcorder or the
printer.
- Do not change the position of the
/ switch.
Downloaded From VideoCamera-Manual.com Manuals
60 •
Photos
) [OK] and press
to resume
and then
- Do not disconnect the USB cable.
- Do not open the memory card slot
cover and do not remove the memory
card.
.
• If [BUSY] does not disappear, disconnect
the USB cable and restore the
connection after a short while.

Print Orders

You can mark in advance the still images
you want to print and set the desired
number of copies as a print order. Later,
you can easily print out the print orders
in one of the following ways:
- Insert the memory card into the memory
card slot of a DPOF-compatible printer.
Refer to printer's instruction manual for
the correct procedure.
-
directly to a PictBridge-compatible
printer (
You can set print orders for up to 998
still images.
Selecting Still Images for Printing
(Print Order)
Set the print orders before
connecting the supplied USB cable to
the camcorder.
FUNC.
: The image selection screen
appears.
F
ROM THE IMAGE SELECTION SCREEN
1 Select (
want to mark with a print order.
2 Press
The number of copies appears in
orange.
Connect the camcorder
57).
[ PRINT ORDER]
) the still image you
to set the print order.
( 19)