Epson powerlite 740c Quick Setup Manual

C
onnect the projector
to your notebook
1
Locate the required cables:
Power cord
2
Connect the computer cable to
the blue Computer/Component Video
port on the projector.
3
Connect the other end to your notebook's video-out
or monitor port.
NOTE: If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer's documentation).
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
T
urn on your equipment
1
Turn on your notebook.
2
Remove the projector's lens cover.
3
Make sure the Power light
is orange and not flashing.
4
Press the
to turn on the projector.
CAUTION: Before unplugging the projector...
Shut down the projector properly:
1. Press the
the Power light flashes orange (about 30 seconds).
2. Once the light stops flashing and the projector beeps, it's safe to
unplug the projector.
Epson

Quick Setup

VGA computer cable
Power button
Power button twice. Let the projector cool while
® PowerLite
Power button
Power light
® 740c