Adjustment - Kenwood KDC-2016 Service Manual

QQ
3 7 63 1515 0
TERMINAL DESCRIPTION / ADJUSTMENT
Pin No. Pin Name
76 SMETER
77 PHONE
78 NOISE
79 TYPE0
80 TYPE1

ADJUSTMENT

TEST MODE
1. To enter test mode
While holding the "FM" key and preset "6" key ,reset the unit.
All indication segments are ON at the beginning of test mode.
2. To release test mode
Simply reset the unit.
(NOTE) The test mode is not canceled by ACC OFF ,power OFF ,momentary power down or the panel detaching.
3. CD receiver test mode specification
Pressing the "Track up" key jumps between tracks in the following order.
No.9 → No.15 → No.10 → No.11→ No.12 → No.13 → No.14 →No.9 (Same as the beginning)
TE
Pressing the "Track down" key jumps to the previous track to the being played.
L 13942296513
Pressing the preset "1" key jumps to No.28 track.
4. Audio adjustment
The volume is set to -10dB (which is shown as 30).
Loudness is OFF.
The BASS / TREBLE and BALANCE / FADER controls can be set to the full boost / full cut and full front / full rear
respectively by pressing the "Track UP" / "Track DOWN" keys.
Sound coordination doesn't appear for the feed.
www
.
I/O Description
I S-meter input from the tuner pack
I PHONE detection input
I Noise detection input
I Destination type input terminal 0
I Destination type input terminal 1
x ao u163
y
i
KDC-2016/215S/35MR
2 9
8
1V or less: TEL MUTE,2.5V or greater: NAVI MUTE
Q Q
3 6 7 1 3 1 5
co
.
9 4 2 8
Processing Operation
0 5 8 2 9 9 4 2 8
m
9 9
9 9
7