Configuring and using PINs
You can configure a PIN (Personal Identification Number) to a mixer to prevent the accidental misuse of monitor mixes other than performers'
own mixes.
PIN settings
Setting and changing PINs are done in advance on the mixer.
Navigate from the SETUP screen to the NETWORK screen of TF series and CL/QL series mixers, then select "PIN for MonitorMix" to set PINs.
The PIN Authentication screen will appear when selecting a mixer with
PIN settings on the SELECT MIXER screen.
The SELECT AUX screen will appear when correctly entering the
PIN set on the mixer. An error message will appear when incorrectly
entering the PIN.
If a PIN is not set on the mixer, you will proceed directly to the SELECT
AUX screen without the PIN Authentication screen being shown.
10
MonitorMix User Guide