Table of Contents
Advertisement
5.6 Guide to SMS settings
Important:
L All SMS-related settings and messages
will be deleted or reset to their default
settings by resetting handset
programming that use the base unit PIN
(page 80).
L Keep the front cover page open for button
locations.
5.6.1 Creating private mailboxes
Private mailboxes can be used for sending and
receiving SMS messages. Each private mailbox
is password protected.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6
Select "Private Mailbox", then press
{>}.
7
Select the desired new mailbox number
("Mailbox1" to "Mailbox6"), then press
{>}.
8
Enter a name for the mailbox, up to 5
characters (see page 46 for character entry),
then press {j/OK}.
9
Enter a 4-digit password for the mailbox, then
press {j/OK}.
10
Select "Save", then press {>}.
11
Press {ih}.
Note:
L To receive SMS messages using a mailbox,
inform others of your mailbox number.
5.6.2 Changing private mailbox
settings
You can change the password or name of the
private mailbox and erase the mailbox.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
5. SMS (KX-FC235AL only)
L If you changed the PIN, enter it (page 80).
6
Select "Private Mailbox", then press
{>}.
7
Select the desired mailbox name, then press
{>} 2 times.
8
Enter the mailbox's 4-digit password.
9
Edit the mailbox name, up to 5 characters
(see page 46 for character entry), then press
{j/OK}.
L To erase the mailbox, press and hold
{C/T}, press {j/OK}, select "Yes",
press {>}, then press {ih} to finish.
10
Enter a 4-digit password for the mailbox, then
press {j/OK}.
11
Select "Save", then press {>}.
12
Press {ih}.
Note:
L If you change the name of a mailbox which
has messages in the receive list, the
messages will remain in the receive list under
the new mailbox name.
L If you erase a mailbox, its messages will also
be erased.
5.6.3 Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (up to 4
digits) so that SMS messages are sent properly.
When sending SMS messages to items in the
handset phonebook or redial list, the PBX line
access number will be deleted.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Public", then press {>}.
4
Select "Settings", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (page 80).
6
Select "PBX Access No.", then press {>}.
7
Select "On", then press {>}.
8
Enter your PBX line access number (up to 4
digits) and a dialling pause, if necessary,
then press {j/OK}.
9
Select "Save", then press {>}.
10
Press {ih}.
45
Advertisement
Table of Contents
