Power Options; Power Injector System - Motorola P-7131N-FGR Product Reference Manual

This guide provides configuration and setup in formation for the ap-7131n-fgr model access point.
Table of Contents

Advertisement

2-6
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
The 5 GHz antenna suite includes the following models:
ML-5299-WPNA1-01R
ML-5299-HPA1-01R
ML-2452-APA2-01
ML-2452-PTA2M3X3-1
ML-2452-PTA3M3-036
ML-2452-APA6J-01

2.5 Power Options

The power options for an AP-7131N-FGR include:
• 48-Volt Power Supply (Part No. 50-14000-247R)
• Power Injector (Part No. AP-PSBIAS-1P3-AFR)
CAUTION An AP-7131N-FGR and must use the 48-Volt Power Supply designed

2.6 Power Injector System

An AP-7131N-FGR can receive power via an Ethernet cable connected to the GE1/POE (LAN) port.
Part No.
specifically for use with the AP-7131N-FGR (Part No. 50-14000-247R).
Additionally, a single-port Power of Ethernet Power Injector is
available for use with the AP-7131N-FGR a (Part No. AP-PSBIAS-1P3-
AFR). Only these two powering solutions should be used with the AP-
7131N-FGR.
Antenna Type
Panel Antenna
Wide-Band Omni-Directional
Antenna
Dual-Band
Facade with 6 Element Antenna
Module
3 Port MIMO Antenna
Dipole
Approximate Gain (dBi)
13
5.0
3/4
4.75/5.5
5/5
2.4GHz Peak Gain: -5.76dBi
5GHz Peak Gain:
band 1: -3.77dBi
band 2: -3.38dBi
band 3: -2.84dBi
band 4: -2.94dBi

Advertisement

Table of Contents
loading

Table of Contents