Product Dimensions; Installation Clearances; Installation Preparation - GE PVW7361 Installation Instructions Manual

PRODUCT DIMENSIONS

10-1/4"
15-3/4"
30" to 36"
15-3/4"
2

Installation Preparation

2-9/16"
4-15/16"
4-15/16"
11-13/16"
1-7/16"
18-1/2"
14-3/16"

INSTALLATION CLEARANCES

These vent hoods are designed to be installed
onto a wall with no above cabinets.
• Install these hoods between the 24" required
minimum and 36" recommended maximum
above the cooking surface.
1/4"
14-3/16"
The vent hood must be installed between the
24" required minimum and 36" recommended
maximum above the cooking surface. The hood
installation height above the cooking surface
depends upon ceiling height and duct cover
limitations. The telescopic duct cover conceals
the ductwork running from the top of the hood
to the ceiling.
heights, see table on page 5.
NOTE: Installation height should be measured
from the cooking surface to the lowest part
of the hood. This hood must be installed onto
a wall. It can be vented to the outdoors, or it
can be installed for recirculating operation. For
recirculation operation, see Recirculation Install
Planning.
24" Required Min.
36" Recommended Max.
For supplied duct cover ceiling
31-11007-1