Easy Setting - Panasonic DMR-BCT74 Operating Instructions Manual

Easy Setting

1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select the channel number allocation, then
press [OK].
• Normally set to "Operator's Channel
Number ( LCN )".
6
Select "Start Auto Setup", then press [OK].
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
7
Auto Setup will start automatically.
(This operation may take some time.)
e.g.,
Auto Setup
Progress
0%
This will take about 3 minutes.
No. Channel Name
Free TV: 0 Pay TV: 0
Searching
When tuning is completed, press [OK].
100%
Type Quality
Radio: 0
8
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
9
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimised. ( 110)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
"Quick Start" is activated when the set time
comes.
10
Select the item to match the type of TV
connected.
For details, refer to "TV Aspect". (
When "Easy Setting has been completed."
appears, Easy Setting is complete.
• Select "Yes" to proceed to "Easy Network
Setting". ( 22)
• Select "No" to finish the Easy Setting.
Preferred Language
You need to set "Preferred Language" after
completing "Easy Setting" or "Easy Network
Setting".
1 Press [FUNCTION MENU]. (
2 Select "Basic Settings" in "Setup", then press
[OK].
3 Select "Preferred Language" in "DVB Tuning",
then press [OK].
4 Refer to page 85, "Preferred Language".
Getting started
94, Clock).
90)
20)
SQT0351
21