Setting Up The Handset - Panasonic KX-TG577 Operating Instructions Manual

Preparation

Setting up the handset

Connecting the charger
(KX-TG5777 only)
L Use only the included Panasonic AC
adaptor PQLV207.
(120 V AC, 60 Hz)
Bottom of
the charger
Fasten the AC adaptor cord to prevent
it from being disconnected.
Note:
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to feel warm during use.)
L The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
14
For assistance, please visit http://www.panasonic.com/phonehelp
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L If necessary, remove the old battery.
2
Insert the battery (A), and press it
Hooks
down until it snaps into position (B).
Then close the handset cover (C, D).
Important:
L Use only the rechargeable Panasonic
battery noted on page 9.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
B
A
C
D