G) Filters Care - Panasonic MC-E4013 Operating Instructions Manual

G) FILTERS CARE

Pre-filter / Main filter A / Main filter B
Cleaning or Replacing the filters
1
To replace the filters,
remove dust compartment
cover (see page 6), and
open the cover.
5
6
Reassemble the filters in the reverse order
and replace the cover.
Put the cover back onto dust compartment
and replace into the main body (see page 6).
Central filter
NOTE: For ease of access to the central filter maintenance, remove the dust compartment (see page 6).
1
Clean air filter / HEPA Filter (depending on model)
NOTE: Under normal use, it is advisable to change the Clean air filter once or twice a year.
Even if HEPA Filter appears not to require replacement, we recommend to change it once a year.
1
2
B
A
Remove main filter A and B.
2
2 Clean air filter
1
2
3
Separate the pre-filter by
pulling it away from the
cover.
NOTE: Clean the cover
by brushing the dust off.
Do not wash.
CAUTION:
• DO NOT use detergents or other cleaning fluids to clean the filters.
They may deteriorate the plastic.
• DO NOT use hot air or hot surface to dry filters.
Keep at room temperature for approximately 24 hours.
• IMPORTANT: Before re-installing the washable filters, make sure
they are completely dry to avoid damaging the cleaner.
The central filter should be cleaned or
replaced when it becomes dirty.
To clean the filter rinse it out in warm water
and dry it thoroughly before replacing.
IMPORTANT: Never forget to reinstall the filter.
2 HEPA Filter
– 7 –
4
A
Remove dust accumulated in the filters
by tapping them against a hard surface.
NOTE: If after having removed the dust,
there is not enough airflow, clean them
out in a warm water or replace with a
new one.
3
B
2
1