NEC D3-10i Quick Start Manual page 40

14. If any ports needed to be edited in the previous
step, this port editing window will appear. Here
you can modify the host port MTU, IP Address,
Subnet Mask, and Gateway address.
When you are finished editing port settings,
click OK to return to the previous Set Host
Connection Port Parameters window.
15. If Set iSNS Server is selected in Step
13, the Set iSNS Server settings
window will appear. To register an
iSNS Server, click Add and enter the
IP Address and Port settings for each
iSNS Server the array can connect to.
Up to four iSNS Servers can be
registered on each array.
When all iSNS Servers have been
added, click OK to continue.
16. After you set the host connection port
parameters, a confirmation window will appear.
Review the port settings and click Set to
continue if they are correct. Otherwise, click
Back to return to the previous step and modify
the port settings as needed.
NEC D3-10i Quick Start Guide 38