Table of Contents
Advertisement
6 Using the System
bl Input the IP address of the primary and secondary DNS servers as necessary.
bm Input the IP address of the primary and secondary WINS servers as necessary.
bn Input the Intelligent Controller's device name (device ID) (within 15 characters).
(This is used to identify the Intelligent Controller when using DNS, for example.)
bo For details on the mail server settings, see "6.8.10.1 Detailed server settings".
* Refer to the network administrator for confi rmation of detailed mail and network settings.
* If a Web browser (on PC) was used to change any of the settings from 7 to bn, the "Network settings have
changed. Restart the unit." message appears and the Intelligent Controller restarts automatically.
* If you change the settings for items 7 and bn, the system restarts so that the new settings are refl ected
when you switch to other screens.
* You cannot set the IP address to "0.0.0.0" or "255.255.255.255". You cannot set the subnet mask, default
gateway, DNS, or WINS to "0.0.0.0".
6.8.10.1 Detailed server settings
From the "WEB settings" screen (
following screen.
This screen enables you to use the same and actual mail server settings to set up the Intelligent
Controller as well. Therefore, check your mail server settings in advance and then apply the same
settings to the Intelligent Controller.
3
4
5
6
7
1 Specify a port to use for sending mails, using a number within 6 digits.
2 Select an encryption type to use for sending mails: "None", "SSL", "TLS", or "STARTTLS".
3 Select this check box if you want to perform authentication during mail transmission.
Settings 4 to 8 below are valid only when you have selected this check box.
6
10
6
10
), clicking the "Server details" button displays the
Main
Sub
1
70
6
10
6
10
Main
Sub
2
8
Hide quick links:
Advertisement
Table of Contents
