Table of Contents
Advertisement
Special Features
Redial/Pause Button
Program Button
Tone Button
Recall Button
How to Use the Pause Button
(For Analogue PBX Line/Long Distance Service Users)
We recommend you press
dialling with a PBX or to access a long distance service.
Ex: Line access number
9
Pressing
(Redial/Pause) once creates a pause.
This prevents misdialling when you redial or dial a stored number.
Pressing
(Redial/Pause) more than once increases the length of the
pause between numbers.
Setting the pause timing
You can select the pause timing, 3 seconds or 5 seconds, according to your
PBX requirements. The factory preset is 1 (3 seconds).
1. Press
(Program), then
2. Press
.
3
3. Enter the base unit password (p. 35).
4. Press
.
3
The current pause timing is displayed.
5. To select 5 seconds, press
OR
To select 3 seconds, press
The setting is displayed.
6. When finished, press
A confirmation tone sounds.
(Redial/Pause) if a pause is required for
(PBX)
9
(Redial/Pause)
I NT
2
.
1
.
(Program).
Intercom Button
Phone number
(Intercom).
IN T
29
Advertisement
Table of Contents
