Table of Contents
Advertisement
8 Initial Settings
For selecting all the tenants on the left list
For cancelling the current selection of tenant(s) on both the left and right lists
For selecting all the tenants on the right list
For cancelling all the settings made and closing the screen
For enabling and sending the set data to the Web Interface for registering the operable tenants
(2)
Editing the data of existing users
• If you click on the "Edit" button, the same screen as that shown in the previous heading
will be displayed.
• The current settings displayed on the screen can be edited in the same manner as when
adding a user.
• The changed settings will be enabled only after they are sent by clicking on the "Send"
button.
• For the administrator user located at the top (No. 0), only the user ID and password can be
changed.
The authority type is fi xed at "Admin. " and cannot be changed.
The operable tenants are fi xed at "All tenants" and cannot be changed.
(3)
Deleting the data of existing users
After selecting a user, click on the "Delete" button. The following message will be displayed.
If you click on "YES" , that user will be deleted.
When a user is deleted, the subsequent users will be shifted upward, and their user
numbers will be decreased by one.
If the same user is registered again, the user number for that user will be the fi nal user number.
The administrator user at the top (No. 0) cannot be deleted.
(4)
Error messages
If any entered data are wrong, one of the following error messages may be displayed when
you click on the "Send" button.
Correct the corresponding data and send the data again.
[Invalid user ID entered.]
A wrong or no user ID (no input) was entered and sent.
32
3 4
Main
Sub
Advertisement
Table of Contents
