Setup; The Initial Settings Procedure; Menu Navigation; Accessing The Settings Menu - Samsung BD-E5200 User Manual

Setup

The Initial Settings Procedure

1. Turn on your TV after connecting the
player, and then turn on the player.
When you turn on the player for the first
time, the player displays the Language
screen.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
> Move " Select
2. Use the ▲▼ buttons on the remote to
select the desired language, and then
press the ENTER button. The Start screen
appears.
3. Press the ENTER button to select Start.
The Aspect Ratio Screen appears.
4. Use the ▲▼ buttons to select an Aspect
Ratio, and then press the ENTER button.
The Network Settings screen appears.
- When you select an Aspect ratio, its effect on
your TV picture is described at the top of the
screen.
5. Select Auto, and then press the ENTER
button. If you do not have a home
network, press the BLUE (D) button on
your remote. You will go directly to the
Home menu.
12
6. The Blu-ray player automatically verifies
your wired network. When verification
in complete, the screen displays "Your
network is operating properly." Press the
ENTER button.
7. The "Initial settings completed." message
appears, and then the Home screen
appears.
- If you Blu-ray player does not connect to your
network or you want to connect manually, go to
Network Setup on page 16.
NOTE
✎
▪ The Home menu will not appear if you do not
configure the initial settings except as noted
below.
▪ If you press the BLUE (D) button during network
setup, you can access the Home menu even if
the network setup is not completed yet.
▪ When you return to the Home menu, the full
screen mode is cancelled automatically.
▪ If you want to display the Initial Setting screen again
to make changes, press the PLAY/PAUSE (
button on the front panel of the player for more than
5 seconds with no disc inserted. This resets the
player to its default settings.
▪ If you use an HDMI cable to connect the player
to an Anynet+(HDMI-CEC)-compliant Samsung
TV and 1.) You have set the Anynet+(HDMI-
CEC) feature set to On in both the TV and
the player and 2.) You have set the TV to a
language supported by the player, the player will
select that language as the preferred language
automatically.
▪ If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 25 minutes,
the power will automatically turn off.

Menu Navigation

1
2
HOME Button : Press to move to the Home
1
menu.
RETURN Button : Return to the previous
2
menu.
ENTER / DIRECTION Button :
Move the cursor or select an item.
3
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current
4
menu.
)
• Home Menu
YouTube
Videos
1
No Disc Change Device View Devices
a d
Selects Videos.
1
Selects YouTube.
2
Selects Photos.
3
Selects Music.
4
Selects Settings.
3
5
Displays the buttons you can use on the
4
6
remote to access functions.

Accessing the Settings Menu

To access the Settings menu and sub-menus,
follow these steps:
1. Press the POWER button.
The Home Menu appears.
2. Press the ◄► buttons to select Settings,
and then press the ENTER button.
3. Press the ▲▼ buttons to select the
desired submenu, and then press the
ENTER button.
4. Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
5. Press the EXIT button to exit the menu.
2
NOTE
✎
▪ The access steps may differ depending on the
menu you selected. The OSD (On Screen Display)
may change in this player after you upgrade the
software version.
3
4
5
Enter
6
"