Before Using For The First Time; Cleaning The Drawer For The First Time; Heating The Drawer For The First Time - Miele ESW 6380 Operating And Installation Instructions

Before using for the first time

 Please adhere the extra data plate for
the appliance supplied with this doc-
umentation in the space provided in
the "Technical service, data plate,
warranty" section of this manual.
 Remove any protective foil and stick-
ers.
Cleaning the drawer for the
first time
 Remove the non-slip mat, if present,
and the rack from the drawer and
clean them with warm water and liq-
uid dish soap, using a clean soft
sponge or damp microfiber cloth.
 Dry the mat and the rack with a soft
cloth.
 Wipe the drawer inside and out with a
damp cloth to remove any dust or
left-over packaging.
 Dry all surfaces with a soft cloth.
 Return the non-slip mat and the rack,
if necessary, to the drawer.
14
Heating the drawer for the first
time
With the drawer empty, heat the appli-
ance for at least two hours.
 Tap the  button to switch on the
drawer.
 Tap the "Menu" button repeatedly un-
til the  symbol lights up.
 Tap the "Temperature" button repeat-
edly until the outer right segment of
the temperature display lights up.
 Tap the "Duration" button repeatedly
until "2h" lights up.
 Close the drawer.
The drawer switches off automatically
after two hours.
The drawer is equipped with a contact
switch. The drawer's heater and fan
will only operate when the drawer is
closed.
Because the metal components are
protected by a conditioning agent, there
will be a slight odor the first time the
drawer is heated up. The harmless odor
will dissipate after a short time and
does not indicate a faulty connection or
appliance defect. During this time,
make sure the kitchen is well ventilated.