Setting Up
System Setup
NOTE
• Each operation in this section can be started from
the multi function menu.
1
Press the <MENU> button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
See the following section for each setting.
• Set up the user interface
• Set up special
(P.75)
• Set up security
(P.76)
• Set up display
(P.77)
• Set up camera
(P.79)
• Set up navigation
(P.80)
• Set up AV
(P.81)
72
72
(P.72)
User Interface Setup
You can setup user interface parameters.
1
Press the <MENU> button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [User Interface].
User Interface screen appears.
4
Set each item as follows.
Steering Remote Controller
Sets the desired function in the steering remote
Learning function of steering
controller. See
remote
(P.74).
Beep
Turns the key touch tone on or off.
Default is "ON".