1. Manuals
  2. Brands
  3. JVC Manuals
  4. Projector
  5. DLA-SH4KNL
  6. Instructions manual

JVC DLA-SH4KNL Instructions Manual

Hide thumbs Also See for DLA-SH4KNL:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
PROJECTOR
DLA-SH4KNL
Thank you for purchasing this JVC product.
Please study this instruction manual carefully before
starting to operate the unit, in order to use the unit correctly.
We take no responsibility for any problems resulting from
misuse of this unit by operating this equipment other than
instructed in this manual.
INSTRUCTIONS
(lens is optional)
For Customer use :
Enter below the serial No. which is
located on the bottom side of the
cabinet. Retain this information for
future reference.
Model No. DLA-SH4KNL
Serial No.
LCT2370-002C

Advertisement

Table of Contents
loading

Related Manuals for JVC DLA-SH4KNL

Summary of Contents for JVC DLA-SH4KNL

  • Page 1 PROJECTOR DLA-SH4KNL INSTRUCTIONS (lens is optional) Thank you for purchasing this JVC product. For Customer use : Enter below the serial No. which is Please study this instruction manual carefully before located on the bottom side of the starting to operate the unit, in order to use the unit correctly.

  • Page 2: Getting Started

    Changes or modification not approved by JVC could may result in fire, electric shock, or other hazards. void the user’s authority to operate the equipment.
  • Page 3 - The lens for this product is optional. Do not attach the - Do not look into the projection lens while the power cord when the lens is not attached. Turning on illumination lamp is turned on. Exposure of your eyes the power when no lens is attached may result in fire, to the strong light can result in impaired eyesight.
  • Page 4 Getting Started Safety Precautions (Cont’d) IMPORTANT: The wires in the mains lead on this product are colored in accordance with the following cord: Green-and-yellow : Earth Blue : Neutral Brown : Live POWER CONNECTION As these colors may not correspond with the colored making identifying the terminals in your plug, The power supply voltage rating of this product is proceed as follows:...
  • Page 5 Dear Customer, This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg...

  • Page 6: Table Of Contents

    Getting Started Contents Operation and Settings Projecting Image ......28 Useful Features During Projection ... . . 29 Main Menu .

  • Page 7: Features

    Supports multi screens (single screen, two- ● This product is about 65 % the size of existing JVC screen, and four-screen modes) projectors of the same class, and its weight is as light as 56 kg (excluding lens).

  • Page 8: Check The Accessories/Optional Accessories

    ● Personal computers or computers are expressed as computers or PCs in this manual. For the EU market (3.3 m x 1) ● Contents of this manual are the copyright of JVC. All rights reserved. Unauthorized reproduction and duplication of this manual, in whole or in part, without the permission of JVC is strictly prohibited.

  • Page 9: Precautions During Use

    This product comes with replacement components required for maintaining the functions of this product, such as optical components, cooling fan and filters. The timing for replacing components varies considerably according to the frequency and environment of use. For details on replacement of components (except filters), please consult any nearby JVC servicing center.

  • Page 10: Names And Functions Of Parts

    Getting Started Names and Functions of Parts Front/Right Side Intake air Intake air Air Inlet/Filter Lens Mounting Bracket The air inlets absorb air to cool the interior of the Mount the optional projection lens. projector. A filter is mounted inside the projector to Adjustable Feet (x 4) remove dirt in the air that enters through the inlets.
  • Page 11 Rear DVI 1 DVI 2 CONTROL Exhaust air DVI 3 STANDBY/ON OPERATE I/B LAMP DVI 4 WARNING RS-232C [DVI 1 to 4] Terminal [LAMP] Indicator This indicator lights up in yellow when the lamp time This is an input terminal for video signals. Connect it to the video output terminal of the computer.

  • Page 12: Connection And Installation

    Connection and Installation Installation Please read the following carefully when installing this unit. Optional projection lens Mount the optional projection lens (A Page 8). For details on mounting the lens, please consult your authorized dealer. Minimum Space Required Do not use a cover that may enclose this unit or block the air inlets/vent holes. Allow sufficient space around this unit. When this unit is enclosed in a space with dimensions as indicated below, ventilate accordingly so that the internal and external temperatures are the same.

  • Page 13: Projector Installation Angle

    Installing the Projector Projector Installation Angle and Screen You can install this projector between 90 . Images will be properly displayed if the horizontal angle is between the range of It is recommended that this projector be installed at right angle to the screen.
  • Page 14 Connection and Installation Movable Range of Projected Image Installing the Projector GL-MS4015SZG Zoom lens and Screen (Cont’d) GL-MS4016SZG Zoom lens GL-MS4021SZG Zoom lens Projected Image 50 % When shift amount in the right direction is +25 % 25 % 25 % Install the projector such that the center of the lens is aligned with the 1/4 position from the left edge of the screen.
  • Page 15 Overlaying projected images (when zoom When light passes through the glass of lens is in use) projection booth Projecting images by stacking projectors The lens shift feature enables you to use up to three stacked projectors at the same time. Stacking projectors enhances the brightness level, and helps to project images that are sufficiently bright even when the venue is relatively big or bright.

  • Page 16: Screen Size And Projection Distance

    Connection and Installation Installing the Projector and Screen (Cont’d) Screen Size and Projection Distance Adjust the distance from the lens to the screen to achieve your desired screen size. GL-MS4015SZG/GL-MS4016SZG/GL-MS4021SZG Zoom lens Projection distance Projection Screen Size Image GL-MS4015SZG GL-MS4016SZG GL-MS4021SZG (Diagonal Length) Width...
  • Page 17 GL-MS4011SG Short focal length lens Projection Screen Size Image Width Projection distance (Diagonal Length) 50" (Approx. 1.27 m) 1.10 m 1.16 m 60" (Approx. 1.52 m) 1.31 m 1.41 m 70" (Approx. 1.78 m) 1.53 m 1.66 m 80" (Approx. 2.03 m) 1.75 m 1.91 m 90"...

  • Page 18: Connecting Video Signals Of The Computer

    Connection and Installation Connecting Video Signals of the Computer Connection During Single-Screen Mode Display The single-screen mode displays signals (up to four signals) from a computer as a single video image. To select to the single-screen mode, set “Display Mode” in the Setting menu to “Single”. (A Page 33) Possible Input Signals and Projected Image Computer Projector Terminal for...
  • Page 19 Normal 2 Stripes DVI 1 DVI 1 DVI 3 4 Stripes Cross DVI 1 DVI 2 DVI 3 DVI 4 DVI 1 DVI 2 DVI 3 DVI 4 Connection During Single-Screen Mode Display Below is the connection example for four-channel signals from the computer. For two-channel signals from the computer, connect to the [DVI 1] and [DVI 3] terminals of this projector.

  • Page 20: Connection During Two-Screen/Four-Screen Mode Display

    Connection and Installation Connecting Video Signals of the Computer (Cont’d) Connection During Two-Screen/Four- Screen Mode Display The two-screen/four-screen mode enables simultaneous display of signals from two or four computers. To select the two-screen mode, set “Display Mode” in the Setting menu to “Double”. To select the four-screen mode, set it to “Cross”.
  • Page 21 Connection Example During Two-Screen Mode Desktop Computer To DVI Terminal DVI 1 DVI-D Cable (Sold Separately) DVI 2 Laptop Computer CONTROL DVI 3 STANDBY/ON OPERATE I/B LAMP DVI 4 WARNING RS-232C To DVI Terminal Connection Example During Four-Screen Mode Desktop Computer To DVI Terminal DVI-D Cable (Sold Separately)

  • Page 22: Network Settings

    Network Settings Connection Using a LAN Specifications of PC for Cable Controlling this Projector Windows XP Professional SP2 / Windows XP Home Edition SP2 / Windows 7 Ultimate / Windows 7 Connect this projector, the computer for controlling this Professional / Windows 7 Home projector, and the switching hub using LAN cables, Premium followed by configuring the network.

  • Page 23: Turning On The Main Power

    Configure subsequent units using the same procedure. ● When duplication occurs in the IP address, make sure that only one unit of DLA-SH4KNL is connected on the same network (turn off the main power of the other DLA-SH4KNL units). Allow a time interval of at least 10 minutes before accessing.

  • Page 24: Ip Address Settings

    Select AInternet Protocol(TCP/IP)B and click APropertiesB Set the IP address Select AUse the following IP addressB Set the AIP addressB (For example, use 192.168.0.100 when DLA-SH4KNL is in its default settings) NOTE: ● Make sure that you take note of the original IP address before altering.
  • Page 25 Setting (Changing) the IP address of this Check if the AActive scriptingB of the Internet projector Explorer is disabled A Click AToolsB and select AInternet OptionsB Launch the Internet Explorer on the B Click in the order of ASecurityB ATrusted SitesB computer ASitesB Check if the proxy has been set in the ALAN...
  • Page 26 Network Settings IP Address Settings Click ANetworkB in the main menu (Cont’d) host PJ-1 user: root Logout Power Latest Error Main Image STANDBY Setting Signal Status Temperature Assigning a static IP address Convergence Rate(Hz) Pixel H Pixel V Link Temp. 1 Lens 60.00 2048...

  • Page 27: Assigning Ip Address From The Dhcp Server

    Using the Mail Delivery Assigning IP Address from the Feature DHCP Server The IP address is automatically assigned by the DHCP server. After connecting, turn on the main power. This feature enables delivery of mail (error message) to ● Refer to page 22 on the details of connection. the preset e-mail address when error occurs inside this ●...

  • Page 28: Operation And Settings

    Operation and Settings Adjust the zoom ratio (screen size) (when Projecting Image zoom lens is in use) You can adjust the focus using the AZoomB item of the Lens menu. host PJ-1 user: root If setting for this projector is not completed, refer to the Logout “Setting Menu”...

  • Page 29: Useful Features During Projection

    Adjust the focus Turn the main power at the rear of the projector unit to off [O] You can adjust the focus using the AFocusB item of the ● The [STANDBY/ON] indicator on the projector unit Lens menu. goes off. To move the focus point closer: CAUTION: Press the A+B (Near) end of AFocusB...

  • Page 30: Main Menu

    Operation and Settings Setting Menu (Cont’d) After installation and connection are complete, perform the necessary adjustment and setting. Operate the menus using the computer’s browser to make adjustments and configure settings. Main Menu This menu displays the ON/OFF status of the power supply and information on signals input to the projector. host PJ-1 user: root Logout...
  • Page 31 Item Setting Value Description Power For turning the power ON/OFF. ON : Turns on the power. OFF : Turns off the power. NOTE: ● The following operating modes of the projector are displayed to the right of the OFF button. STANDBY : Standby (OFF) PROJECTION...

  • Page 32: Image Menu

    Operation and Settings Setting Menu (Cont’d) Image Menu This menu is used for adjusting the picture quality. host PJ-1 user: root Logout Brightness Main Image Setting Green Convergence Blue Lens Option Contrast Network Mail Green Blue Gamma Hide denotes the factory default. Item Setting Value Description...

  • Page 33: Setting Menu

    Setting Menu This menu is used for specifying the input level of the terminal and the display mode. host PJ-1 user: root Logout Input Level Main Standard Enhanced Image Setting Display Mode Convergence Lens Option Network Mail Single Double Cross denotes the factory default.

  • Page 34: Convergence Menu

    Operation and Settings Setting Menu (Cont’d) Convergence Menu This menu is used for correcting color shifts in the optical system. host PJ-1 user: root Logout Blue Main Image Setting Convergence Lens Option Network Mail Item Setting Value Description — For adjusting the horizontal/vertical position of red and blue colors on Blue the image.

  • Page 35: Lens Menu

    Lens Menu This menu is used for adjusting the projection lens. host PJ-1 user: root Logout Zoom Focus Shift Main Image Setting Convergence Lens Option Network Mail Item Setting Value Description Zoom — For adjusting the zoom ratio (screen size). NOTE: ●...

  • Page 36: Option Menu

    Operation and Settings Setting Menu (Cont’d) Option Menu This menu is used for specifying settings for flipping images and screen displays. host PJ-1 user: root Logout Flip Main Horz. Vert. Image Setting Lamp Power Convergence 100% 100% Lens Option Back Color Message Display Network Blue...

  • Page 37: Network Menu

    Network Menu For configuring the network settings. host PJ-1 user: root Logout Host Name Setting Main Host Name PJZZZZZZ Image Setting IP Address Setting Convergence DHCP Client DHCP Static IP Lens IP Address 192.168.0.2 Option Network Subnet Mask 255.255.255.0 Mail Default Gateway 192.168.0.254 Mac Address...

  • Page 38: Mail Menu

    Operation and Settings Setting Menu (Cont’d) Mail Menu This menu is for configuring the mail settings, which sends out an error message to the computer of the preset address when error occurs on this projector. host PJ-1 user: root Logout E-Mail Setting Main E-Mail...
  • Page 39 indicates the factory default Item Setting Value Description E-Mail Setting For configuring the e-mail feature. E-Mail : Use the mail feature. : Do not use the mail feature. E-Mail — For specifying the destination e-mail address. Address (Default Value: user@localhost) NOTE: ●...

  • Page 40: Rs-232C Interface

    Operation and Settings RS-232C Interface You can control this projector by connecting the computer to this unit using a RS-232C cross cable (D-sub 9 pins). The commands to control this unit and the response data format against the received commands are explained here. For details, please consult your authorized dealer.
  • Page 41 Parameters used for the data format The following 2 types of parameters are used for command and response data: (1) ON/OFF (2) Special Parameter Each parameter is as follows: (1) ON/OFF Shows the status (ON or OFF) of the unit, such as POWER and HIDE. Character Meaning (2) Special parameters...

  • Page 42: Others

    Others Maintenance Turn off the power of the projector unit, and unplug the power cord when cleaning or replacing the filter. Cleaning and Replacing the Filter Clean the filter regularly. If the filter is soiled, air intake efficiency may deteriorate, thus resulting in malfunction of the product. Replace with a new one if the filter fails to remove dust thoroughly or if it is damaged.

  • Page 43: Routine Servicing

    Remove the filter cover Routine Servicing The filter is located at the front and side of the projector unit. Clean dirt on the cabinet Remove the sponge and filter Do this with a soft cloth. In case of heavy soiling, soak a Hold the center of the filter using your fingers, and pull cloth in neutral detergent diluted with water, wring dry the filter toward you to remove it.

  • Page 44: Troubleshooting

    Others ● Device noise is heard from the interior of the projector Troubleshooting ● There is color bleeding on the screen When the projector fails to run properly due to external noises, perform the following operations. Check to ensure that the power is shut down. Check the following points before sending this product for Unplug the power cord, and insert again.
  • Page 45 Symptom Probable Cause Corrective Action Reference Page ● Is the brightness level properly ● Adjust accordingly using ABrightnessB A Page 32 Image is unusually dark adjusted? of the Image menu. A Page 36 or bright ● Adjust ALamp PowerB in the Option menu. ●...

  • Page 46: What To Do When These Messages Are Displayed

    Others What to do when these messages are displayed Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used. Message Lamp Time Over Message Cause (Details) ● Displayed when the lamp time has exceeded 1500 hours. The message is displayed for a period of 3 minutes during each projection.

  • Page 47: Warnings Using Indicators

    Warnings Using Indicators The lamp time and warning mode are indicated using the indicator. For details on indicator displays during normal operation, refer to the note below. Indicator Description STANDBY/ON LAMP WARNING About time to replace lamp (Lamp time has exceeded 1400 hours) Light On —...

  • Page 48: Latest Error

    Others Latest Error The latest error number appears in the Main Menu when an error occurs in the projector. Error details are as follows: Error Number Meaning The lamp does not turn on. Accumulated lamp time has exceeded 1500 hours. The lamp goes off during projection.

  • Page 49: Specifications

    1280 1024, Specifications 1024 768, 800 600, 640 480 DVI clock to 165 MHz (Single) (Rx clock) to 330 MHz (Dual) Display resolution 4096 2400 General Power supply AC 110 V to 120 V, Terminal AC 200 V to 240 V 50/60 Hz Video input DVI-D (dual link) 24 pins Power consumption...
  • Page 50 Others Specifications (Cont’d) Pin Assignment RS-232C Terminal Pin No. Signal Operation Signal Direction Incoming Data This Projector Outgoing Data This Projector Signal Ground 1,4,6 to 9 DVI-D Terminal Pin No. Signal Pin No. Signal TMDS Data 2– TMDS Data 3+ TMDS Data 2+ TMDS +5 V Power Supply TMDS Data 2/4 Shield...

  • Page 51: Dimensional Outline Drawing

    Dimensional Outline Drawing (Unit: mm) Side 827 (Including the optional projection lens) M10 hole (x 12) Tightening depth: 10 to 20 (Projection lens is optional) Front Rear Center of lens DVI 1 DVI 2 CONTROL DVI 3 OPERATE STANDBY/ON LAMP DVI 4 WARNING RS-232C...

  • Page 52: Gnu General Public License Version 2, June 1991

    Others The precise terms and conditions for copying, distribution GNU GENERAL PUBLIC and modification follow. LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder Copyright (C) 1989, 1991 Free Software Foundation, saying it may be distributed under the terms of this...
  • Page 53 These requirements apply to the modified work as a 4. You may not copy, modify, sublicense, or distribute the whole. If identifiable sections of that work are not derived Program except as expressly provided under this from the Program, and can be reasonably considered License.
  • Page 54 8. If the distribution and/or use of the Program is How to Apply These Terms to Your New restricted in certain countries either by patents or by Programs copyrighted interfaces, the original copyright holder who places the Program under this License may add an If you develop a new program, and you want it to be of explicit geographical distribution limitation excluding the greatest possible use to the public, the best way to...
  • Page 55 ************************************************** Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure GNU LESSER GENERAL PUBLIC LICENSE that a company cannot effectively restrict the users of a Version 2.1, February 1999 free program by obtaining a restrictive license from a patent holder.
  • Page 56 GNU LESSER GENERAL PUBLIC LICENSE c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this TERMS AND CONDITIONS FOR COPYING, License. DISTRIBUTION AND MODIFICATION d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program 0.
  • Page 57 If distribution of object code is made by offering access to b) Use a suitable shared library mechanism for linking copy from a designated place, then offering equivalent with the Library. A suitable mechanism is one that (1) access to copy the source code from the same place uses at run time a copy of the library already present on satisfies the requirement to distribute the source code, the user's computer system, rather than copying library...
  • Page 58 9. You are not required to accept this License, since you Each version is given a distinguishing version number. If have not signed it. However, nothing else grants you the Library specifies a version number of this License permission to modify or distribute the Library or its which applies to it and "any later version", you have the derivative works.
  • Page 59 How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
  • Page 60 Printed in Japan © 2013 JVCKENWOOD Corporation 0608TTH-SW-VP...

Table of Contents