Cisco WAP551 Administration Manual page 17

Getting Started
Using the Access Point Setup Wizard
STEP 17
STEP 18
STEP 19
STEP 20
STEP 21
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
For the WAP121 device, the Wizard displays the Summary - Confirm Your Settings window.
Skip to STEP 25.
For the WAP321 device, the The Wizard displays the Enable Captive Portal - Create Your
Guest Network window.
Access Point Setup Wizard—Captive Portal Creation
Select whether or not to set up an authentication method for guests on your network (WAP321
only), and click Next.
If you click No, skip to
If you click Yes, the Wizard displays the Enable Captive Portal - Name Your Guest Network
window.
Specify a Guest Network Name for Radio 1. For the WAP561 device, select whether the guest
network uses Radio 1 or Radio 2.
Click Next. The Wizard displays the Enable Captive Portal - Secure Your Guest Network
window.
Choose a security encryption type for the guest network and enter a security key. For a
description of these options, see
Click Next. The Wizard displays the Enable Captive Portal - Assign the VLAN ID window.
STEP 25.
System Security.
1
16