Table of Contents
Advertisement
7.23. Remove
(Squawker)
1. Remove the Cabinet assy. (See section 7.22.)
2. Disconnect the relay connectors.
3. Remove the screws (×2
4. Remove the Speaker (Squawker/L, Squawker/R).
7.24. Remove the GL-Board
1. Remove the Cabinet assy. (See section 7.22.)
2. Remove the Speaker (Squawker /R). (See section 7.23.)
3. Remove the screws (×3
shield R.
4. Disconnect the connector (GL02).
5. Remove the screws (×2
the
Speaker
each).
) and remove the Bottom
) and remove the GL-Board.
7.25. Remove the K-Board and S-
Board
1. Remove the Cabinet assy. (See section 7.22.)
2. Remove the Speaker (Squawker /L). (See section 7.23.)
3. Remove the screws (×3
tom shield L and the S-Board shield plate.
4. Remove the screws (×2
5. Disconnect the connector (K1) and remove the K-Board.
6. Remove the screws (×2
unit.
7. Disconnect the connector (S2).
8. Remove the screws (×1
25
,×1
) and remove the Bot-
).
) and remove the S-Board
) and remove the S-Board.
Advertisement
Table of Contents
