Makita BO6040 Instruction Manual page 7

ASSEMBLY
1
1. Side grip
1. Abrasive disc
1
3
1. Screw
2. Hex wrench
3. Pad
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing side grip (optional accessory)
003297
Remove one of the screws which secure the head cover. Screw the side grip
on the tool securely. The side grip can be installed on either side of the tool.
Installing or removing abrasive disc
003302
CAUTION:
• Always use hook-and-loop system abrasive discs. Never use pressure-
1
sensitive abrasive discs.
To install the abrasive disc, first remove all dirt or foreign matter from the pad.
Then attach the abrasive disc to the pad, using the hook-and-loop system of
the abrasive disc and the pad. Be careful to align the holes in the abrasive disc
with those in the pad.
To remove the disc from the pad, just pull up from its edge.
Changing pad
003315
2
Makita offers an extensive range of optional super soft, soft and hard pads.
Remove the screw counterclockwise from the center of the base with a hex
wrench. After changing the pad, tighten the screw clockwise securely.
7