For Usb Interface Cable Users; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-8460N Quick Setup Manual

Step 2

For USB Interface Cable Users

For Mac OS
Make sure that you have finished the instructions from Step 1 "Setting Up
the machine" on pages 4 - 11.
For Mac OS
upgrade to Mac OS
the latest information for Mac OS
http://solutions.brother.com)
1
Switch off the machine and disconnect the
machine from the power socket (and from
the Macintosh
connected an interface cable).
2
Turn on your Macintosh
3
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
4
Double-click the MFL-Pro Suite.
24
Installing the Drivers & Software
®
X 10.2.4 or greater
®
X 10.2.0 to 10.2.3 users,
®
X 10.2.4 or greater. (For
®
®
, if you have already
®
.
5
Follow the on-screen instructions, and
restart your Macintosh
6
X, visit
After the Brother DeviceSelector window
appears, connect the USB interface cable to
your Macintosh
The Brother DeviceSelector window will not
appear if you have also connected a USB
interface cable to the machine before
restarting your Macintosh
overwriting a previously installed version of
the Brother software. If you encounter this
problem continue with the installation but skip
®
Step 9. You should choose your Brother
machine from the Model pull-down list in the
main screen of ControlCenter2. (For details,
see the Software User's Guide on CD-ROM.)
®
.
®
and then to the machine.
®
or if you are