Circuit Diagram; Wiring Diagram - Makita BDA341 Technical Information

C
ircuit diagram
Fig. D-1
Terminal
Connector of
LED circuit
W
iring diagram
Fig. D-2
Lead wires of LED Circuit has to be guided in Housing set (L)
as illustrated below, and fix them with Lead wire holders.
Fig. D-3
Put the extra portion of
Lead wires in this place.
Connector of
Switch side
Connector of
LED side
Terminal
Put the extra portion of
Lead wires in this place.
When connecting Lead wires of Brush holder
complete to Switch, connect them as follows.
* Lead wire (black) to M2 Terminal
* Lead wire (red) to M1 Terminal
Connector of
Switch
Wiring of LED Circuit
(before setting Switch and other electrical Parts)
Lead wire holders
Connector of LED circuit is connected with
Connector of Switch in the next step.
Wiring after setting Switch and other electrical parts
Fix the Lead wires of Connectors
with these Lead wire holders.
Fix Lead wires of Brush holder complete with these Lead wire holders. And put the Lead
wires of Brush holder complete in the position illustrated above, expanding them between
York unit and Brush holder complete.
Switch
Switch lever side
LED circuit has to be put into Housing set (L)
as illustrated below.
FET Heat sink
Yoke unit
Switch
Lead wire holders
P 8/ 8
Color index of lead wires' sheath
Black
White
Red
Brush holder complete
FET
LED circuit
Brush holder complete
Armature