Troubleshooting
Other problems
The printer does not go on ............................................................................................................................ 1034
The printer takes time to start up ................................................................................................................... 1034
If the Printer Makes a Strange Sound ........................................................................................................... 1035
Messages advising to check the maintenance cartridge are not cleared ...................................................... 1035
The printer consumes a lot of ink .................................................................................................................. 1035
Ink Level Detection ........................................................................................................................................ 1036
The printer does not go on
The printer is unplugged.
The specified voltage is not sup-
plied.
The printer takes time to start up
The printer may have shut down incorrectly last time. This
may happen after power outages or if the printer is unplugged
before it is turned off.
In this case, the next time power is restored, the printer's hard
disk is checked, and startup may take some time.
12
1034
The printer does not go on
>
Other problems
>
Cause
Plug the power cord into the outlet, and then turn on the printer.
Check the voltage of the outlet and breaker. Use a power source that conforms to
the printer specifications.
(See "Specifications.")
Cause
Corrective Action
→P.923
Corrective Action
Please wait a while, because it may take several mi-
nutes to finish checking the hard disk.
If an error message is displayed after the hard disk
check, follow the instructions indicated to resolve the
problem.
iPF6350