Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets; Paper Is Not Cut Straight; Paper Is Not Cut - Canon ipf6350 User Manual

3.
Press the OK button.

Roll paper cannot be inserted into the paper feed slot

The roll paper is warped.
Paper is jammed by the paper feed slot.
After a roll was advanced, the paper was manually
pulled out by force, closing the Paper Feed Slot.

Cannot load sheets

The paper source selection is incorrect.

Paper is not cut straight

The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before
it is cut.
You are using paper that cannot be cut with the
Cutter Unit.
Cut Speed is not configured correctly in the
Control Panel menu.

Paper is not cut

The printed document became caught on a foreign ob-
ject by the Output Tray, which lifted the document. The
Cutter passed under the paper.
iPF6350
Downloaded from ManualsPrinter.com Manuals
Cause
Cause
Press the Load button and select the paper source.
Cause
Cause
Troubleshooting
Corrective Action
Straighten out curls and reload the roll.
Remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet, Fed Manually.")
Remove the roll and open the paper feed slot.
(See "Removing the Roll from the Printer.")
Corrective Action
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Specify Manual in Cutting Mode in the Control Panel menu and
use scissors or a cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.")
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")
→P.886
Corrective Action
Remove the foreign object by the Output Tray to enable the
printer to eject the printed document, keeping it level.
Roll paper cannot be inserted into the paper feed slot
> Problems Regarding Paper
→P.1006
→P.1010
→P.784
→P.791
>
12
1013