Advertisement
Quick Links
TROLLEY
GRILL & BAKE BARBECUE
Simple Assembly Instructions -
Before
you start
assembling
your
barbecue
here are
some
important
safety
warnings
Tel - 01282 478200
Rectella International Ltd. Bancroft Rd, Burnley. Lancs. BB10 2TP
1.
Do not use indoors. Always site your barbecue outdoors and on level
ground away from trees and wooden fencing.
2.
CAUTION! Do not use spirit or petrol for lighting or re-lighting.
Use a specially formulated barbecue lighting fluid, gel or fire lighters.
3.
Do not attempt to light the fire if lighting fluid has been spilt over clothing
4.
Do not try to re-light the fire with fluid/gel as the charcoal may still be
hot and cause a flare-up
5.
WARNING! keep children and pets away from the barbecue area.
6.
ATTENTION! This barbecue will become very hot. Do not move it during operation.
7.
Always wear oven gloves when handling your hot barbecue.
8.
Make sure that the barbecue has completely cooled before removing the ash.
9.
Flame-ups can occur if hot fat drips onto the burning charcoal. Keep
a water sprayer handy to extinguish the flames.
Helpline Details
Email - sales@rectella.com
Please keep for future reference
Web - www.barbequick.com
BQ2121-1a
Advertisement
Related Manuals for BAR-BE-QUICK Grill & Bake
Summary of Contents for BAR-BE-QUICK Grill & Bake
- Page 1 TROLLEY GRILL & BAKE BARBECUE Simple Assembly Instructions - Please keep for future reference Before Do not use indoors. Always site your barbecue outdoors and on level ground away from trees and wooden fencing. you start CAUTION! Do not use spirit or petrol for lighting or re-lighting. assembling Use a specially formulated barbecue lighting fluid, gel or fire lighters.
- Page 2 Top Cover Handle Top Cover Handle Brackets Temperature Gauge Top Cover Left Hand Wind Shield Rear Wind Shield Right Hand Wind Shield Warming Basket Cooking Grill Grill Handles Left Top Shelf Lid Stays Fire Tray Right Top Shelf Oven Oven Door Handle and Nuts Long Legs Short Legs Short Shelf supports...
- Page 3 Components Door Stay Linkage Top Cover Handle Stud M6 x 14mm Screws x 16 M6 Washer-Nuts x 39 M6 x 16mm Screws M6 Fibre Washers M6 x 10mm Screws x 21 M6 Washer M5 Washer-Nuts Axle Spacers M5 x 10 Screws M8 Nyloc Nuts M6 Domed Nuts M8 Washers...
- Page 4 Assembly Instructions Important Please read the following instructions carfully and completely BEFORE attempting to assemble the barbecue. Keep all polythene wrappers away from children and dispose of all wrapping cartons thoughtfully. Great care is taken during the manufacture of your barbecue to eliminate sharp edges. However, please take care when assembling the barbecue to avoid injury TOOLS NEEDED: CROSS HEAD SCREWDRIVER, SET OF METRIC SPANNERS OR ADJUSTABLE SPANNER AND A CLEAN NON ABRASIVE SURFACE LARGE ENOUGH TO LAY THE FIRE TRAY UPSIDE DOWN...
- Page 5 Stage Two - Assemble the top shelf and legs Place the oven upside down on a clean, non abrasive surface with the oven door facing you. Take the two long legs and the top shelf (with handle on . Attach them to the right of the oven using four M6 x 14mm screws, washer-nuts per leg .
- Page 6 Stage Three - Assemble the lid Attach the top cover to the oven with top cover hinges and 6 of M5 x 10 screws and washer-nuts using M5 spanner. See drawing 8 Open the top cover , attach the right and left lid stays to the top cover by crossing them through the hole on the right and left side of the top cover...
- Page 7 Loosely fit the right and Left hand wind shield via the lower fixing holes using 2 off M6 x 10mm screws , washer-nuts for the rear holes, 2 off M6 x 16mm screws, washer-nuts for the side locat- ing holes. See drawing 11.
-
Page 8: How To Light
Make sure the assembly instructions have been followed correctly. HOW TO LIGHT We recommend you light your Lumpwood / Briquettes with Bar-Be-Quick Lighting Fluid, Gel or Cubes. USING CUBES (If using traditional lumpwood or briquettes) Place two or three cubes in the firetray.