Table of Contents
Advertisement
Installations and connections
Installing the ink film
Insert the orange
gear into the left slot
of the main unit.
When the unit runs out of ink film, the following message will be displayed.
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ｺｳｶﾝｼﾃｸﾀﾞｻｲ U23
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2)
KX-FAN191 (15 m) (*1)
KX-FAN191W (15 m X 2) (*1) ￥1,523
4 4
ﾌｨﾙﾑｶﾞ ﾅｸﾅﾘﾏｼﾀ
ﾋﾝﾊﾞﾝ :K X - F A N190
￥714
￥1,208
￥893
1
2
3
Insert the white gear into the right slot
of the main unit.
4
5
6
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
than does the KX-FAN190/190W.
・As of August 2008.
Open the control panel.
Open the back cover.
Insert the ink film.
If the ink film is slack, tighten it by
winding this gear (orange).
Close the back cover pressing
"
" down on both sides
until it clicks into place.
Close the control panel.
・Tax included.
Advertisement
Table of Contents
