Auto Line Feed; Paper Width - Epson TM-T20II-i Technical Reference Manual

Auto line feed

• Always enabled (initial setting)
• Always disabled
No settings are required.
USB power-saving function
• Disabled
• Enabled (initial setting)
Release condition of receive buffer BUSY
• Releases when the remaining receive buffer capacity becomes 256 bytes (initial setting)
• Releases when the remaining receive buffer capacity becomes 138 bytes
This function is enabled only when Receive buffer capacity is set to 4 KB.
Error signal output
• Enabled (initial setting)
• Disabled
No settings are required.

Paper width

• 80 mm (initial setting)
• 58 mm
To change the paper width, you need to install the 58-mm width paper guide plate. For
information about how to change the paper width, see
Chapter 2
"Changing the Paper Width" on page
Setup
2
34.
49