Setup Menus
Digital Audio Output
Change the settings when you have connected equipment
through the unit's DIGITAL AUDIO OUT terminal (
Perform step 1 of "Accessing the Setup Menu" (
, to select "Audio", then
, to select "Digital Audio
Output", then
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz
despite the settings if the signals have a sampling frequency of
over 96 kHz or 88.2 kHz, or the disc has copy protection.
After selecting "Digital Audio Output" (
, to select "PCM Down
Conversion", then
, to select "On" or "Off", then
OK
[On]
Signals are converted to 48 kHz or 44.1 kHz.
(Choose when the connected equipment cannot
process signals with sampling frequency of 96 kHz or
88.2 kHz.)
[Off]
Signals are output as 96 kHz or 88.2 kHz. (Choose
when the connected equipment can process signals
with sampling frequency of 96 kHz or 88.2 kHz.)
Dolby Digital
Choose whether to output by "Bitstream", which processes
Dolby Digital signals on other connected equipment, or to
convert the signals to "PCM" (2ch) on the unit before output.
After selecting "Digital Audio Output" (
, to select "Dolby Digital",
then
, to select "Bitstream" or
"PCM", then
[Bitstream] When you have connected the unit to
equipment displaying the Dolby Digital logo.
[PCM]
When you have connected the unit to
equipment that doesn't have Dolby Digital logo.
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
56
OK
above, step 3).
OK
above, step 3).
OK
OK
DTS
Choose whether to output by "Bitstream", which processes
65).
DTS signals on other connected equipment, or to convert the
52).
signals to "PCM" (2ch) on the unit before output.
After selecting "Digital Audio Output" (
, to select "DTS", then
, to select "Bitstream" or
"PCM", then
[Bitstream] When you have connected the unit to equipment
displaying the DTS logo.
[PCM]
When you have connected the unit to equipment
that doesn't have the DTS logo.
Incorrect settings can cause noise to be output which can
be harmful to your ears and speakers, and audio will not be
recorded properly on media such as mini discs.
Select Audio Channel For DV Input
You can select the kind of audio when recording from the unit's
DV in terminal (
Perform step 1 of "Accessing the Setup Menu" (
, to select "Audio", then
, to select "Select Audio
Channel For DV Input", then
, to select "Stereo 1",
"Stereo 2" or "Mix", then
[Stereo 1]
Records audio (L1, R1)
[Stereo 2] Records added audio such as narration (L2, R2)
subsequent to original recording.
[Mix]
Records both Stereo 1 and Stereo 2.
Status Messages
Choose whether to show status messages automatically or not.
Perform step 1 of "Accessing the Setup Menu" (
, to select "Display", then
, to select "Status
Messages", then
left, step 3).
OK
27).
OK
OK
OK
52).
OK
52).