Panasonic DMR-E50 Operating Instructions Manual page 28

Creating play lists
Numbered
buttons
ERASE
PLAY LIST
RETURN
Specify start and end points to create scenes, then specify the order
in which they are to be played. These scenes are not recorded sep-
arately so this doesn't use much capacity.
You can create a maximum of 99 play lists and 999 scenes.
Preparation
Release protection (cartridge *page 11, disc +page 34) before
proceeding.
1
2
While stopped
Press [PLAY LIST].
Press [A, V] to select "- --/--" and
press [ENTER].
3
Press [ENTER] at the start point.
The length of the
whole contents
on the disc.
The location of
the start point.
l
Use [++I, [FF] and slow-motion @page 18) to find the
start and end points.
4
l
Pressin
Press
J [ I++], [ ..I ] allows you to select other programs.
[ENTER] at the end point.
The location of
the end point.
5
To specify another scene
Select "Next" and press [ENTER], then repeat steps 3 and 4.
Press [A, V] to select "Exit" and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [PLAY LIST].
To stop partway through
Press [RETURN].
For your reference
l
You cannot specify an end point before a start point.
l You may not be able to specify points within 3 seconds of each
other.
l
Play pauses if the end of the last program on the disc is reached
during this procedure.
l
Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.