Related Manuals for T-COM GT–318RI
Summary of Contents for T-COM GT–318RI
- Page 1 Installation of DSL Connection and Glitel GT–318RI DSL Modem Further information available: Self-Installation Guide at www.t-com.sk ■ © August 2006, Slovak Telekom, a. s.
- Page 2 CD or download it from Fault Reporting Centre 12129 www.t-com.sk. For more information contact the Internet Hotline 0800 123 777. If you want to report a fault or if you need to replace a telephone socket. It is available 24 hours a day and the calls are toll-free.
- Page 3 Installation Package Contents Installing the DSL Connection on a Standard Telephone Line Check the socket of your standard telephone There are normally 2 types of line. connectors used: 1. Your standard telephone line must be ended RJ 45 connector RJ 11 connector by a separate socket with a single RJ 11 (bigger and wider) (smaller)
- Page 4 Follow the installation steps bellow: 3. Use the cable enclosed in the installation package (both connectors are identical 1. Pull out the cable connecting other devices, – RJ 11) to connect the telephone socket with such as a telephone, other telephone sockets, the splitter port labelled LINE.
- Page 5 Diagram of the Overall DSL Connection in the case Installing the DSL Connection on an ISDN Line of a Standard Telephone Line Your ISDN line is ended by a telephone socket There are normally 2 types of sockets Telephone socket with an RJ 11 connector (see figure on page 5).
- Page 6 If you have a suitable socket from which the 3. Use the other cable (with identical RJ 11 connector can be pulled out, follow the steps connectors) enclosed in the package to below: connect the DSL modem with the splitter. Plug one connector of the cable into the DSL 1.
- Page 7 Diagram of the Overall DSL Connection in the case of an ISDN Line 2. Connect the socket – the line-in jack freed Glitel GT–318RI on the NT (in point 1) with the splitter port Cable with DSL modem identical RJ 11 labelled PHONE using the enclosed cable connectors (both connectors identical –...
- Page 8 Installing the Glitel GT–318RI DSL modem Connecting the Glitel GT–318RI modem to Please read the following instruction Installing a Glitel GT–318RI modem: the computer: before the installation: In order to work with the Glitel GT–318RI 1. Plug one connector (RJ45) of the Ethernet If you have already used an Internet modem, you must set the properties of your cable enclosed in the packaging into your...
- Page 9 Testing the Correct Connection Launching the modem’s configurator Telephone – telephone/digital line functionality check Insert the enclosed CD into your computer’s The dialling tone should be heard from the receiver of your telephone/fax. Try to make a call drive. If the content does not open and check the quality of sound in the receiver.
- Page 10 Login: dsl@test Password: dsl To test the DSL functionality of your connection, write the web address www.t-com.sk in your Internet browser (Internet Explorer, Netscape, Firefox etc.) serving for the purposes of testing the functionality of the installation. The functionality can be tested only on this web site; access to other web sites will be disabled.