Dgs-1210-08P; Front Panel; Rear Panel - D-Link DGS-1210-16 Reference Manual

Product Introduction

DGS-1210-08P

8-Port 10/100/1000Mbps PoE plus 2 SFP Slot Web Smart Switch.

Front Panel

Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-10): The Link/Act/Speed LED flashes, which indicates a network link through
the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port.
When a port has an amber light, this indicates that the port is running on 10M or 100M. When it has a green
light it is running on 1000M.
PoE LED: The PoE LED illuminates green when power is supplied to PoE devices plugged into the ports. It
illuminates amber when an error condition is met and will be off when no power is supplied.
Reset: By pressing the Reset button for 5 seconds, the Switch will change back to the default configuration
and all changes will be lost.

Rear Panel

Power: The power port is where to connect the external power adapter.
Security Lock: Provide a Kensington-compatible security lock to be able to connect to a secure immovable
device. Insert the lock into the notch and turn the key to secure the lock. The lock-and-cable apparatus
should be purchased separately.
Power Switch: Toggle this switch to turn the switch's power on or off.
Figure 1.1 – DGS-1210-08P Front Panel
CAUTION: The Mini-GBIC ports should use UL recognized Optical
Transceiver product, Rated Laser Class I. 3.3Vdc.
Figure 1.2 – DGS-1210-08P Rear Panel
D-Link Web Smart Switch User Manual
5
5