Using The Wps Push Button Configuration - Yamaha R-N402 Owner's Manual

Connecting to a network
Using the WPS push button
configuration
You can easily set up a wireless connection with one push
of the WPS button.
Note
This configuration does not work if the security method of your
wireless router (access point) is WEP. In this case, use another
connection method.
MEMORY
Cursor keys  / 
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press SETUP.
2
Use the cursor keys ( / ) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
3
Use the cursor keys ( / ) to select
"Connection" and press ENTER.
4
Use the cursor keys ( / ) to select
"Wireless" and press ENTER.
WIRELESS
¡WPS
5
Press ENTER twice.
"Connecting" appears on the front display.
6
Push the WPS button on the wireless router
(access point).
When the connection process finishes, "Completed"
appears on the front display. When the setting
finishes, verify whether the unit is connected to a
wireless network (p. 19).
If "Not connected" appears, repeat from Step 1 or try
another connection method.
7
To exit from the menu, press SETUP.
16
En
PRESET
ENTER ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a
wireless home network.