Pan/Tilt And Zoom Operation; Panning And Tilting - Sony SRG-360SHE Operating Instructions Manual

2
Turn on the peripheral devices.
To switch ON/OFF the video output using the
infrared remote commander
You can switch ON/OFF the video output using the
POWER switch on the infrared remote commander when
supplying power to the camera.
When the POWER is off, the POWER/NETWORK lamp
will go out.
POWER
Pan/Tilt and Zoom
Operation

Panning and Tilting

1
Press the POWER switch.
You can turn on and off the video output of the unit.
When it is ON, the camera automatically resets pan/
tilt and moves the Preset1 position.
2
Press the arrow button to pan or tilt the camera.
While checking the picture on the screen, press the
desired arrow button.
To move the camera little by little, press the button
just for a moment.
To move the camera in a wide range, press and hold
the button.
To move the camera diagonally, press the B or b
button while holding down the V or v button.
To face the camera back to the front
Press the HOME button.
POWER/NETWORK
lights
2
If the camera moves in a different direction from
the one you intended
The camera is preset so that the image output from the
camera is rotated toward the right whenever you press the
b button.
To face the camera toward the opposite
direction
You might wish to face the camera toward the opposite
direction from that of the button you pressed, for
example, when you change the direction of the camera
while checking the picture on the screen. In such a case,
press the 2 (REV) button while holding down the L/R
DIRECTION SET button.
Arrow button Movement of the
To reset the setting
To reset the setting, press the 1 (STD) button while holding down
the L/R DIRECTION SET button.
Arrow button Movement of the
Note
The setting above only changes the signal emitted from
the infrared remote commander, and does not change the
setting of the camera itself. Therefore, repeat the setting
for each infrared remote commander if you are using
more than one infrared remote commander.
30
Setting
camera
While holding
down
Press
Setting
camera
While holding
down
Press