Makita BCV03 Instruction Manual page 4

NOTE:
• When only the lowermost indicator lamp blinks for either Battery 1 or Battery 2, this
means that the battery capacity is low, so the product does not operate. In these
cases, charge the battery that is low, or replace it with a fully charged battery. The
product does not operate when either of the batteries has run out.
• The indicated charge may be slightly lower than the actual level during use or im-
mediately after using the product.
How to read the remaining battery capacity indication
Indicator lamps (Battery 1 or Battery 2)
: On
: Off
or
• Depending on the conditions of use and the ambient temperature, the remaining
capacity may not be indicated correctly.
Example of remaining charge indication (Battery 1: 80%, Battery 2: 10%)
Battery 1
4
Remaining charge or
indication contents
: Blinking
50% to 100%
20% to 50%
0% to 20%
Charge the battery
Battery 2
Abnormal indications during use
The BCV0 indicates various states using the remaining battery capacity indication.
Indicator lamps
: On : Off
Battery 1
1. BCV0 malfunction
When the three indicator lamps for Battery 1 and the three indicator lamps for Bat-
tery 2 light alternately, the BCV0 may have malfunctioned. Contact your Makita
dealer or nearest Makita Sales Center to request inspection and/or repair.
Indication contents
: Blinking
Battery 2
The BCV0 may have
malfunctioned.
The protective function
operated.
The protective function
operated.
Charge the battery.
The BCV0 detected an
abnormally high voltage.